• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

EMG JAX install

Nov 16, 2006
1,411
2,517
Tennessee
I've ordered a set of EMG JAX pups with VT VT for each pickup that I'm going to install in a Squier Deluxe Active 4. I was thinking about adding a football input jack plate to use the input jack that comes with the set instead of cutting and soldering to the existing. This will depend on if the quick connect wires are long enough of course. Thoughts, suggestions or has anyone done this before? Thanks in advance.
 
Received the pickups last night and I'm thinking about going old school VVT and using an old jazz control plate I have since the holes line up. The input would then be located on the front of the bass like a "normal" jazz bass.
 
So got the PUPs installed and they sound great. Decided to just use the original jack and solder the connection. Waiting on another quick connect cable so I can get the second tone working. Here's the finished product.
ImageUploadedByTalkBass1417313763.353264.jpg
 
  • Like
Reactions: GlassToMouth
So this bass is finally complete!! I received the additional quick connect I ordered to configure VT VT and after some help I was able to get it to work the way I had hoped. The tone is outstanding and it will see it's first show this weekend.