• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

? for all the 5 string players

I LOVED the HT322 with my Quantum 5. One of the best sounding cabs I have ever played through! Can't go wrong there, just make sure your back can handle it and you'll be in tone heaven. I haven't owned one for a while but I think it will just start to sing with 700watts. The cab can eat some serious power.
 
What your Favorite cab. Not any lill 1 10 deal either... I need VOLUME!:bassist: and somthing that can take about 700watts.
Any thoughts?

Hello, and welcome to TalkBass. You will find a veritable cornucopia of tips, knowledge, and experiences posted on this site aimed at all manners of everything bass. That said, I suggest you make friends with the 'search' function, as questions such the above are daily topics. Good luck and have fun.
 
If it were one single cab, the Eden D410XST. 1000-watt handling, unbelievably deep low end. B-strings sound like magic with this cab.

If it were a combination of cabs, the Eden D210XLT and D212XLT. The 212 has a wonderfully rich thick low end but still tons of definition, and the 210 gives me punch and clarity when I'm up higher on the fretboard.
 
On a watt-per-watt basis, the loudest possible volume always comes from bass horns. You can make more noise with 700w into bass horns than direct radiator boxes.

The downside is, bass horns are expensive to have built for you, and intricate/time consuming to build yourself.

Any commercial box can make a lot of noise at 100 Hz. If you need a lot of noise at 40 Hz, you need a large box. Bass horns are no exception to this rule.

Link Removed is the loudest 410 I have tested. It has no bottom end, but is loud as hell above 100 Hz. Generally, the higher the rated SPL of the cab, the less bottom it has.
 
410XLT - no bottom end? It goes down to 50hz...I guess you are looking for around the 30hz range....what's the point of blasting away down there? The soundguy isn't going to like you blasting away heavily in that range on stage anyway and the PA system is going to be much more efficient in that range, so it's just about useless to do it yourself.

I pair my 410XLT with the 212XLT (which goes down to 40hz) and with those two I get a massive and thick low end. Yeah, my b string is not fully reproduced, but a thick sounding low end (50hz-100hz) is a lot more useful for my bandmates to hear me on stage.