• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Fretless series/parallel PJ wiring help - Blend or switch? TBX or no load tone?

I finally decided to upgrade the pickups on my defretted 1994 yamaha rbx 350 wired vol blend tone.
I plan to use a fretless in my current project so I thought of giving it an upgrade, going for a Dimarzio dp126 PJ set or a relentless PJ set if I can find one for a decent price.

While I'm at it I will change the tone pot since it is not in the best shape with a no load or TBX tone with a 0.33 cap.
I plan to add a 500k push/pull pot for series/parallel on the volume to bypass the blend pot ( found a good wiring here on the forum).
My 2 questions are:


1.Should I just ditch the blend (I think ungrounded already, will post pics) and go with a 3 way switch? I enjoy the simplicity of a switch and I had luck on another bass with pickup balancing when both are 100% on, but maybe on a fretless PJ a blend would be more useful.

2. Is a TBX worth it or a no load tone pot would be "enough"? I can see the TBX being useful in series to regain some highs, but also for harmonics.

Any experience and opinion is welcome, thanks everybody in advance!
 
Thank you for the input!

I was lucky on another bass with series/parallel and thought it sounded nice on a PJ by checking some demos of the fender boxer PJ reissue (aka jazz bass special) which should be wired in series when the switch is in middle/both pickups.

I'm worried two split coil pickups might sound a tad dark in series, hence the idea of the TBX or No-load tone pot besides the Dimarzio recommended 500k pot and 0.33 cap.

We will see, anyway series/parallel is a cheap and reversible mod, worst case scenario I'll use it mostly in parallel and call it a day