GEDDY LEE---NECK?

[bassman639]

How is the neck adjusted,there is no hole for to adjust the neck ,someone help!!



THANX GUYS

 

[mlove]

if you are talking about the truss rod it is at the top of the neck, just above the nut.

 

[bassman639]

THATS THE PROBLEM,THERE IS NO HOLE

 

[mlove]

there must be access to the truss rod?
i hope

 

[TeeMartin]

ITS ON THE OTHER SIDE OF THE NECK YOU HAVE TO TAKE OFF THE PICKGUARD AND USE A SCREWDRIVER.

 

[bassman639]

i'll try it


thanx

 

[bikeplate]

Hi

Its on the butt of the neck, under the guard. Its a pain in the you know what to adjust. Just like the original. Remove the guard, use a flat screwdriver very carefully. If not, have to take the neck off. Good luck

Rob

 

[Yell03SpecV]

Easier to loosen the neck mounting screws about 75%, and adjust from there. That will ensure you don't have a hard time, and don't fubar your finish on the body at the bottom of the neck joint.

 

[darkblack99]

This worked for me as a long term solution:

GL Jazz truss rod mod