Genz Benz Shuttlemax 6 problem

[faulknersj]

I have had my Shuttlemax for a couple years and am having a weird issue with the FET channel. It is sending a really hot signal continuously and when i switch it on, a loud screeching sound that sounds like a tornado comes out of my cab. Anyone had this issue before? any ideas?

Thank you TBers!

 

[agedhorse]

I have had my Shuttlemax for a couple years and am having a weird issue with the FET channel. It is sending a really hot signal continuously and when i switch it on, a loud screeching sound that sounds like a tornado comes out of my cab. Anyone had this issue before? any ideas?

Thank you TBers!

Try switching to the tube channel and see if it exists here as well. You can PM me and I will walk you through some troubleshooting, I have an idea but want to know what you find first.

There's no problem getting this fixed, I will help you get this resolved.

 

[deelgee]

Try switching to the tube channel and see if it exists here as well. You can PM me and I will walk you through some troubleshooting, I have an idea but want to know what you find first.

There's no problem getting this fixed, I will help you get this resolved.

Encountered same problem as faulknersj. Screech on turn on. Switched to FET only was still there. However this problem only reared its head twice in close to 30 turn ons. Do you still do repair on GB ShuttleMax 6?
Your input is very valuable.

Try switching to the tube channel and see if it exists here as well. You can PM me and I will walk you through some troubleshooting, I have an idea but want to know what you find first.

There's no problem getting this fixed, I will help you get this resolved.

 

[agedhorse]

Yes your amp is still part of the flat rate factory service program. PM me for details. No problem gets your amp fixed.