• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Good priced Stoner/Sludge/Punk Amp and head

Hey i'm in a sludge stoner band and a punk band and want to update from my behringer 100 watt amp. It sounds like crap and can't get loud at all. I want to be able to here my self playing with other guys in a room and we are going to start gigging. What are some amps and heads that are nicely priced. I'd like to pay under a grand for both. The cheaper the better, but i don't want a pos like my behringer that i embarassingly have. Any recommendations?
 
Look around and see what you can find used. There are deals to be had.

As far as amps go I would look out for old Sunn or Acoustic solidstate heads or a tube head. Whatever really.. Ampeg, Marshall, Sound City, Simmwatts, Fender Bassman, Peavey... I wouldn't recommend anything less then 100 tube watts. When it comes to cabs see if you can find some of the 80's Peavey stuff or some Bag End's. Yeah, and Ampegs, or even SWR. The bigger the better.

Some of this stuff doesn't go all that cheap anymore, but you might get lucky.

Oh.... There is this guy on here called Mr. Foxen who scored a deal on a ****load of old Sound City amps. I think one of those can be had for a reasonable price, but I think it would involve some repairs or service.
 
Where in the world are you located?

The speaker cab(s) will be your limiting factor in terms of volume. Old used Peavey 2x15 cabs loaded with Black Widows are among the best for loud and cheap. Sometimes Ampeg 8x10 810E cabs can be found locally for < $500 depending on location.

Search your local used market for amps. minimum 500 watts for solid state or hybrid head, minimum 200 watts for a tube head.

Just about any working amp would be an improvement over Behringer. blecccchhh
 
Get a good used rackmount effects system. e.g. I have a Line6 Bass POD XT Pro. You'll have a TON of effects, different heads, different cabs, an eq, compression(if you use it), a tuner, etc... Run effects through a power amp, into a cab. I have an actual head, a GK 1001RB-II. So, I use it. A cab with a tweeter will allow a wider range of tonal varieties. I use an SWR Workinman's Tower 8x10. My rig sounds phoenominal, rattles the bones. :bassist:
 
100_1725.gif


Paid $900 for everything you see in the pic. Cab cost $400.00, Head was $300, and bass was $200.

Patience is your friend.