Hartke ha4000 need advice

[reggie hall]

Ok guys first I would like to say this is a amazing amp ,i did a gig tonight using it and I had the volume at only 4 and it was stupid loud ..it had my insides vibrating ......anyways here's my problem ,i bought the amp used for 100$ and I already painted it black so now it looks almost new now I noticed that all the screws on the top that holds the cover on the amp are all stripped ,so if I try to tighten them they won't tighten at all and I already lost a few of them, should I add some glue to keep the top cover down or what's a good cheap option? Thanks in advance

 

[reggie hall]

The vibrations from my amp being on the cab made a screw or two pop out and I don't know where they landed lol then bringing the amp back home I take it out the car and there goes another screw ugh

 

[sissy kathy]

Something called a 'tech screw'. Swing by a construction site and contact the HVAC guy. Ask for a few of the screws. They are self tapping screws that can be put in with a 1/4 inch socket. Or, IM me I can mail you some; I have a few thousand in my tool bin. After they've been installed you can remove and replace them with a screwdriver or the socket.

 

[reggie hall]

Something called a 'tech screw'. Swing by a construction site and contact the HVAC guy. Ask for a few of the screws. They are self tapping screws that can be put in with a 1/4 inch socket. Or, IM me I can mail you some; I have a few thousand in my tool bin. After they've been installed you can remove and replace them with a screwdriver or the socket.

Will do thAnks

 

[sissy kathy]

Screws sent.

 

[sissy kathy]

Okay, it's been five months and you haven't posted pictures yet. Wuzup wi dat?