on one of the stacked knobs whenever i turn it, it turns the electronics it is attached to rather than turning itself and i cant find a way to tighten it! can anyone help?
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
ibanez ehb stacked knobs loose
- Thread starter louie bass
- Start date
1. Stop doing that because you can weaken the solder connections and possibly snap a wire off, etc.
2. Remove the knobs, if it’s stack knobbed there are likely set screws that hold them in place.
3. Loosen the nut that holds the pot all the way, take the pot out.
4. If there isn’t already, add a lock washer.
5. Reinstall the pot, tighten it down.
6. Reinstall knobs
7. Enjoy a cool beverage and admire your work.
2. Remove the knobs, if it’s stack knobbed there are likely set screws that hold them in place.
3. Loosen the nut that holds the pot all the way, take the pot out.
4. If there isn’t already, add a lock washer.
5. Reinstall the pot, tighten it down.
6. Reinstall knobs
7. Enjoy a cool beverage and admire your work.
thanks for advice! sorry this is my first time on this site.
No problem not a big deal, common mistake. Welcome!!! Always great to have more bass players here and increase our pool of knowledge! Hopefully you can give and receive a wealth of knowledge while you’re here!
