• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

JBL K130 drivers; Treasure or Trash?

Hi there!

I'm a owner of two very old (probably from the late 70's) vintage JBL drivers and I don't know what to do with them. The model is K130 (15", 125W, 8ohms), both still in working order, and as far as I can tell they've never been reconed. So what are these, treasure or trash? Originally they were mounted in a horn-loaded cabinet but have been used as PA-speakers in a normal BR cabinet. I can't find much info on them on the internet (besides some basic technical info), but if I can't get these sold I'll probably build a pair of PA/Stage monitors out of them...
 
I think those were the guitar 15's at the time the K140's were popular for bass. I love the K140's , very sweet tone for bass. If you go to the JBL web site, you can probably find some info on them.
 
I'd guess you could probably snag $100-$200 a piece from the right buyer. eBay would make it easier to find buyers but entails more work. Just leave 'em on craigslist and see if you get any bites.
 
Ok, so I found some tech info on these;

Fs: 40Hz, Qts: 0,25, Qms: 4, Qes: 0,27, Sensitivity: 102dB, Vas: 297.3L, Eff: 6.7, Pe: 125W, Xmax 0.76, Re: 6.3, Le 0.6, Sd: 0.09, Bl: 18, Mms: 60, Flux: 1.2

They go low (Fs 40Hz), have an incredible sensitivity of 102dB (!), but that Vas=297L is a lot, and they only take 125W RMS (250W peak). Maybe I'll just pair these with two of these; Link Removed and use them as a spare PA-speakers...
 
Hi there!

I'm a owner of two very old (probably from the late 70's) vintage JBL drivers and I don't know what to do with them. The model is K130 (15", 125W, 8ohms), both still in working order, and as far as I can tell they've never been reconed. So what are these, treasure or trash? Originally they were mounted in a horn-loaded cabinet but have been used as PA-speakers in a normal BR cabinet. I can't find much info on them on the internet (besides some basic technical info), but if I can't get these sold I'll probably build a pair of PA/Stage monitors out of them...
check out lansing heritage forums....there are guys there that know what the guy that built it had for lunch that day....
 
Ok, so I found some tech info on these;

Fs: 40Hz, Qts: 0,25, Qms: 4, Qes: 0,27, Sensitivity: 102dB, Vas: 297.3L, Eff: 6.7, Pe: 125W, Xmax 0.76, Re: 6.3, Le 0.6, Sd: 0.09, Bl: 18, Mms: 60, Flux: 1.2

They go low (Fs 40Hz), have an incredible sensitivity of 102dB (!), but that Vas=297L is a lot, and they only take 125W RMS (250W peak). Maybe I'll just pair these with two of these; Link Removed and use them as a spare PA-speakers...
They actually don't go low, and they especially don't go low and loud. The .76mm excursion limits them to about 15 watts before farting out in the low end. The 102dB sensitivity is realized at the cost of low end response, which chokes off around 200 Hz. That's perfectly OK for their intended application, electric guitar, but for electric bass, not so much.
 
  • Like
Reactions: Yobnwal