• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

kustom Deep End 300HD problems

I recently bought a used Kustom Deep End 300 HD at a local guitar shop. When I test drove it the previous amp tube was blown. The owner replaced it and it played fine. I got it home and it intermittently would crackle and sometimes the sound would be distorted. Sometimes when I would pluck the E string hard the sound would come back.
I took the amp back. The owner removed the tube and it tested ok. Played the amp and it sounded ok at the shop. I took it home.
Again at home I began having the same trouble. I took it back and the owner took the amp to his amp repair guy. The repair guy cleaned the volume and some other stuff. He said it checked out ok.
I picked the amp up and when I got it home it did the same thing.
I did notice that when you strike a low note hard the light behind the tube fades.
The owner told me to bring it back.
I am running the amp into a TC k210 and a Acoustic 115 mkII.
I notice the crackling epically when I turn it up. I have no problem with my Harte ha2500 head.
Anyone know what the problem may be from what I described. Maybe it's my house and the amp does not like it.
 
If light is dimming could mean a basic connector is going bad or a solder connection is cracked.

Since id assume alot of pushing n pulling on the tube socket board id check around that area.

Old bad tubes can krickle krackle so hope its a actual new tube. Not a microphonic tube that came out of someones spare stash.

Dimming light shows more connector or power supply issue. Or even simple corrosion on a ground point going to that assembly where the tubes at.

You can tap the tube and if there is excessive krickle crakle its just a poopy tube. The plates vibrate loose inside and you get all kinds of random noise.