Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

MM pickup dimensions.

Discussion in 'Pickups & Electronics [BG]' started by Jazzin', Sep 20, 2005.


  1. Jazzin'

    Jazzin' ...Bluesin' and Funkin'

    Can somebody check the dimensions of their MM pickup for me please.
    Height and Width, with and without the little bumps. This if for a four stringer btw.

    ------
    | o o | ^
    | o o | |
    | o o | |
    | o o | H
    ------
    <-W->

    I'm thinking of changing my JJ to an MM, and I want to know how much of a difference there is in size.
     
  2. luknfur

    luknfur

    Jan 14, 2004
    DIXIE
    FWIW:

    dimentions are listed on the Bart site but they are roughly 2 7/8" x 3 1/2"
     
  3. Jazzin'

    Jazzin' ...Bluesin' and Funkin'

    The site gives me 3 15/16 (with bumps for screws) X 1 7/8. This makes alot more sense than your numbers, unless you meant 1 7/8 and not 2 7/8.
     
  4. luknfur

    luknfur

    Jan 14, 2004
    DIXIE
    Yeh, it's 1 7/8. I used a construction tape and was going from the 1 inch mark instead of hooking the lip over the pup. I usually use a flat metal ruler but had the tape out. Sorry about that.