• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

My pf500 keeps cutting out, why is this?

It spreads out my sound more makes me sound more punchy. My guitarist and drummer are both very loud. I need it
I don't believe anything is wrong with your amp. As stated above, the ohms are too low for the amp to operate normally. I'd suggest selling the HLF and 118 and getting an 810 or two 410he cabs. You'll get enough volume to handle your guitarist and drummer AND it will have plenty of punch.
 
I don't believe anything is wrong with your amp. As stated above, the ohms are too low for the amp to operate normally. I'd suggest selling the HLF and 118 and getting an 810 or two 410he cabs. You'll get enough volume to handle your guitarist and drummer AND it will have plenty of punch.
Best advice in the thread! If it was Ampeg's fault the amp would've gone completely TU - so all is well with the OP PF500
 
Much of that depends on EQ. I've found the HLF to be more satisfactory as a single use cab than the HE. My HLF was my go to outdoor single cab because it could get louder than either of my HE cabs would solo.

Pushing the mids - sure, pushing a 5string hard, not in my limited (compared to Jimmy!) experience.
 
  • Like
Reactions: AlexanderB
Much of that depends on EQ. I've found the HLF to be more satisfactory as a single use cab than the HE. My HLF was my go to outdoor single cab because it could get louder than either of my HE cabs would solo.

Pushing the mids - sure, pushing a 5string hard, not in my limited (compared to Jimmy!) experience.
I assume that's because with the 410he you were probably wasting lows from the amp on trying to get a buttload of fundamental out of it.
 

Latest posts