NAD Carvin BX1500!

[DJ Bebop]

Active switch is always on and the drive i screwed with a little and it didnt solve my feedback problem.

Maybe you have it in bi -amp mode and feeding off the low side?
Or in bridge mode and feeding too much power?
I don't know :scowl:

 

[DJ Bebop]

Check that bi amp switch

 

[jlfpercello]

Maybe you have it in bi -amp mode and feeding off the low side?
Or in bridge mode and feeding too much power?
I don't know :scowl:

Ill have to check that out.

 

[jlfpercello]

Ill have to check that out.

Its definitely not on bridge mode cause i have it hooked up to 2 cabs. A 4x10 and a 1x18

 

[BassmanPaul]

Check that the Tuner out and the FX loop work as they should.

 

[5port]

Bypass the tube next to make sure it hasnt gone wonky.

 

[DJ Bebop]

Its definitely not on bridge mode cause i have it hooked up to 2 cabs. A 4x10 and a 1x18

One off of each amp?

 

[::::BASSIST::::]

Loving my BX1500 too.

What settings are you guys using?

 

[darius8]

When you tested the bass with the Ampeg you used a different cable, I'm assuming. Check your cable. Long shot and too simple, I know.