• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

NAD (Well...new to me)

Salicete

Gold Supporting Member
Aug 20, 2006
1,409
4,086
Godforsaken-Maryland
Check my newer post on this thread for an "I am an Idiot" update...

One of the first rigs I had as a 12-yer old kid was a Kustom PA 100 head (silver sparkle, roll-n-tuck) on a Univox 1 x 12 cabinet, and later the 2 x 15 matching Kustom cab.

I sold it to finance some crap for my first wife. I always wanted that rig back really badly, but never could find one locally. Yup, it was pure nostalgia, as there is nothing really special about those rigs, other than the uber-cool look. (Or un-cool, depending on your tastes.)

I found this for just over $200 at Atomic Music, a really cool local used gear spot, and grabbed it. OK, it is gold, not silver, but close enough. As far as I can tell, everything works perfectly except the missing "ON" indicator bulb and missing lens cover, which will be an easy fix. This even has a reverb tank, which sounds really nice.

I'm going to use it with that little Epifani next to it for my Rick-O-Sound stereo steup. Not loud enough to piss-off the neighbors, but it makes me happy.

Annnnd...for the "No pic no amp weenies."

4wuM1Y5.jpg


xGVmzMV.jpg
 
Last edited:
I don't recall ever playing bass through one, but the rhythm guitarist in one of my first groups had one, and that thing was a MONSTER for relatively clean headroom "hit you like a ton of bricks" guitar tone. To this day one of my favorite sounds...
 
  • Like
Reactions: Salicete
Found two minor issues. The aforementioned pilot light, (now fixed with a new light bulb and a blue jewel lens), and the reverb tank getting wonky at higher volumes.

Turns out a previous owner had hoarked-down the tank to its suspension rails so tightly that I had difficulty loosening the mounting nuts and bolts.

I loosened it and let down so it was just resting on its isolation mounts and problem solved.

May replace the two knobs missing their decorative center disks, or may call it character and leave it as is.

Runs like a champ, sounds great.


pfxRiqZ.jpg
 
I’m a tuck ‘n roll fan. I have a couple Kustom T&R 2x15 cabs. The heads kinda suck but the cabs with the JBL’s sound great. I often use one with an Ampeg V4B head.
 
  • Like
Reactions: Salicete
When I got this, it was wearing this plug, a 3-prong/grounded plug. It had a cardboard cover over the internals.

Oa9BI4V.jpg


I decided to update it with a lighted plug, and when I removed it, I found that some tool had put it on a two wire cord.

OK, I'm an idiot for not noticing the lack of a ground wire when I opened and cleaned the amp; additionally, I knew there was a ground issue, as when I took my hands off the strings, I got line noise, a dead giveaway I stupidly ignored at first.

Even worse, the "Death Cap" was still there, and I missed that too...If you don't know what that is, it is a capacitor that that connects the AC to the metal chassis, and which filters high frequency line noise.

When it goes bad, and they all do eventually, the 110 current will seek ground, and if you are plugged in and touching your strings, that could be you.

pfbnEZm.jpg


Sooooooo, all squared away now with a 3-prong plug and cord, and properly grounded.

h7RGdob.jpg


I should have ~carefully~ inspected this before I used it, and I didn't.