• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

NCD - And now presenting his highness, Henry the 8x8!

It's rare that I ever seek out gear that I have owned in the past but this is one example worthy of owning again (also the GK 800RB) - just picked it up today, thus cause for celebration!

When I picked it up I discovered that the four middle drivers were not working so I suspected a wiring issue (and I was correct). After getting it home I removed each driver and inspected the wiring and many of them weren't connected to the harnesses! :eek:

All have been corrected and secured so they won't come loose again, and the cab sounds fantastic. Even the piezo works! Now I have to wait for an opportunity to use it. :sour:

Anyway, I'm elated to own another - back to your regularly scheduled program. ;)
View attachment 3901080
One SWR's Best! I played through a Triad for years until I couldn't lift it anymore.:cool::D Lol!
 
  • Like
Reactions: Razman
Had one of these with a Boogie 1x18 under it. (Yeah, it was the 90's). It was glorious.
I don't doubt that your rig was very glorious!

This is why I like the 800RB. Originally intended for bi-amping, I got the best sound running it full range: run the 300 watt section into your main cab (like the Henry) and then the 100 watt section into something like a lower wattage but very sensitive 15 or 18" cab and BAM - there's your sound! Plenty of clarity a la the 8x8 and enough bottom via the big woofer below. And if you had a smaller gig, just power a 210 with the 100 watt section. Totally versatile amp. I digress...
I'm still rockin' my Henry the 8 x 8 since the 90s. Lots of bottom end and I was once declared too loud by the rest of the band in a large museum space, The Museum of Flight, with the rest of the band through a large PA and me with the 8 x 8 and a SWR SM400 and no PA input.
Congrats!
We have an SM400 (or is it a Workingman's 400?? I dunno) in our youth center atop a Goliath III. It sounds good, but for practices I'll probably wheel in the Henry and my amp, either the Mesa 400 or my 700rb (when I get it fixed).
I saw Michael Rhodes with Amy Grant opening for Vince Gill at the Ryman. Michael used an older Trace head with the UV light on the Henry. He sounded just great with both acts.
I love TE's SMX 12 band series amps - I know it sounded great!
 
  • Like
Reactions: EatS1stBassist
It's rare that I ever seek out gear that I have owned in the past but this is one example worthy of owning again (also the GK 800RB) - just picked it up today, thus cause for celebration!

When I picked it up I discovered that the four middle drivers were not working so I suspected a wiring issue (and I was correct). After getting it home I removed each driver and inspected the wiring and many of them weren't connected to the harnesses! :eek:

All have been corrected and secured so they won't come loose again, and the cab sounds fantastic. Even the piezo works! Now I have to wait for an opportunity to use it. :sour:

Anyway, I'm elated to own another - back to your regularly scheduled program. ;)
View attachment 3901080

'Cool pick up.
 
...I'm not one of those "high-pass everything" guys, but Henry can run out of gas/be hard to hear on a loud stage, and my guess is that it would really benefit from a HPF.
My experience too.

We had one in a back line at our rehearsal studio. Sounded really good.

An HPF would have been just the thing it needed to protect the speakers, keep the amp cooler, get more headroom and cut the low-end mud at higher volume giving the lows/low mids more definition.:thumbsup:
 
  • Like
Reactions: Razman
My experience too.

We had one in a back line at our rehearsal studio. Sounded really good.

An HPF would have been just the thing it needed to protect the speakers, keep the amp cooler, get more headroom and cut the low-end mud at higher volume giving the lows/low mids more definition.:thumbsup:
I think the 4/5 string switch is essentially a HPF. I can't seem to find any specs on it, but the manual says it just extends the low end response. That sounds like a HPF to me (disengaged it's allowing more LF sound to be amplified).
 
  • Like
Reactions: EatS1stBassist
Oh I have an obsession with 8"s.
Decades of using 8"s in the BBII.
Bag Ends, Celestions, LDS long throws,
& NOS Fender neo SWR.

Fantasised about doing a Henry with LDS long throw 8"s. 1280w handling. Then they were discontinued. They made the BBII a monster!

One of the Celestions is in my LA-8. Transformed it.

AER Basic Performer. 4x8". Two inside two facing out.

Yes love the 8"s!
 
It's rare that I ever seek out gear that I have owned in the past but this is one example worthy of owning again (also the GK 800RB) - just picked it up today, thus cause for celebration!

When I picked it up I discovered that the four middle drivers were not working so I suspected a wiring issue (and I was correct). After getting it home I removed each driver and inspected the wiring and many of them weren't connected to the harnesses! :eek:

All have been corrected and secured so they won't come loose again, and the cab sounds fantastic. Even the piezo works! Now I have to wait for an opportunity to use it. :sour:

Anyway, I'm elated to own another - back to your regularly scheduled program. ;)
View attachment 3901080

Great find! After my 8x8 was stolen, I had to get another one. At the time, I was able to get a new one special ordered from SWR right before Fender bought them.
 
  • Like
Reactions: EatS1stBassist
So the previous one I had I used with an 800rb but sold it to a local yokel. He has since added a Goliath Jr. to it, running off the 100 watt section. He said I have first dibs on that rig when he retires it, then I'll have two. Buhahaha!


I'm still lovin the 800rb and Henry. I put a TE 2x8 with it on that 100 watt section. But I think I like the 2x10 better. Even though I "want" to like the 2d8 better ???
 
Had one years ago. I think I also had an ampeg 610 at the time and was mainly playing my SVT-CL. The Henry sounded good but the amp didn't fit on the top very well so I didn't keep the cab very long.

I had the problem with my amp rack not fitting well. I installed a stainless handrail from Ace Hardware as an SVT type handle. Makes it easier to move and gives an amp rack a place to sit.
 

Attachments

  • 20200715_123451.jpg
    20200715_123451.jpg
    1.3 MB · Views: 50
I had the problem with my amp rack not fitting well. I installed a stainless handrail from Ace Hardware as an SVT type handle. Makes it easier to move and gives an amp rack a place to sit.
I'm putting this on my to-do list as it definitely needs a bar on the back. Thanks for posting this - you gave me the motivation to do this. @H2okie, want one also? I'll see what I can find. It will make your cabinet easier to move when I come reclaim it from you. :D;):thumbsup:
 
I'm putting this on my to-do list as it definitely needs a bar on the back. Thanks for posting this - you gave me the motivation to do this. @H2okie, want one also? I'll see what I can find. It will make your cabinet easier to move when I come reclaim it from you. :D;):thumbsup:
I believe this is the one I used. No modification was needed! Just screw it into the cab, making sure the top of the bar was level with the top of the cab.
https://www.amazon.com/Delta-D6318SS-Exposed-Bathroom-Stainless/dp/B074WPHZKT
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
  • Like
Reactions: Bhammon

Latest posts