Need help please!

[Thebaum92]

I need to know what Cable i need to get this Warwick cabinet to work with the Hartke HA3000. any help is greatly appreciated.

 

[David Jayne]

Well the amp is 1/4" out, but the cab......that looks strange, not sure but it looks like it's been modded? Probably best to use the Speakon input but.....Can you post a better pic?

 

[B-string]

Yes better pic needed. I think I can make out XLR and 1/4" on the amp, the cab I can't tell if those are just XLR. XLR was used for a time for speakers before speakons came out. (No you can NOT use a mike cable).

 

[Thebaum92]

Well the amp is 1/4" out, but the cab......that looks strange, not sure but it looks like it's been modded? Probably best to use the Speakon input but.....Can you post a better pic?

Hope this helps

 

[David Jayne]

Yes, certain old Trace Elliot amps used XLR connectors for speaker connections(BAD idea IMO). Someone must have modded it for that purpose. You SHOULD be OK with a 1/4" to Speakon cable(use one of the two center connectors-those are Speakon).
No guarantees though-the internal wiring might be goofy.

 

[Thebaum92]

Yes, certain old Trace Elliot amps used XLR connectors for speaker connections(BAD idea IMO). Someone must have modded it for that purpose. You SHOULD be OK with a 1/4" to Speakon cable(use one of the two center connectors-those are Speakon).
No guarantees though-the internal wiring might be goofy.

Alright man thanks alot!

 

[David Jayne]

NP

 

[Thebaum92]

Still having some issues with this.

 

[David Jayne]

Still having some issues with this.

How so.