Need help!

[AWillis93]

I have a peavey tnt 115s that has completel quit on me. I have taken the speaker out checked the speaker evrrything seems to be fine. Pulled the amp out no blown fuses everything seems to be making a good connection. When I plug my bass up there isn't any sound. I've tried everything I know to do. Any info to get me on track to getting it fixed would be great! Never got into much detail with amps and speakers before, but know the basics. Thanks for any help!!

 

[foolforthecity]

Not knowing your level of expertise,
Did you try another cable and/or bass?
Is there a light indicating power at least into the amp?

 

[David Jayne]

Did you check the speaker with a meter, or at least a battery?

 

[1stnamebassist]

This may sound silly but its happened to pretty much everyone but did you check the guitar cord and also the guitar? Does your bass use a battery? I'm about the same as you on amps, I have no help in that department.
Hope you find the problem!

 

[foolforthecity]

If you've done the previous stuff mentioned, do you have an effects loop going on? If so, disconnect it from both the Preamp Out and Amp In, then check and adjust your gain throughout the signal chain from bass to amp and see if you have sound now.

 

[foolforthecity]

So did you get it working again? Inquiring minds want to know