New Cabs/Toanhenge Expandeth

[Phil Horrocks]

Picked up these two 210AVs off marketplace. They sound great being pushed by The Big Iron and I’m gonna run all three cabs at practice on Sunday

 

[bottomzone]

Awesome Peavey T-40 bass!!!

 

[Michedelic]

I don’t know what the numbers may be, but I’d check into the ohm load situation before you do that.

 

[Phil Horrocks]

I don’t know what the numbers may be, but I’d check into the ohm load situation before you do that.

The 212AV is 4 ohms, the 210AVs are 8 ohms apiece, so I can run the SVT at 2 ohms.

 

[Coot]

I have a couple of those SVT 210's. They are 200 watts apiece. I have run Mesa 800 watt heads(set at 2 ohm) into them and as long as I was very conservative with the master they sound great and have some decent punch to them. I know the Ampeg 210s are 8 ohm, and 2 together are 4 ohms, but with the Mesa set to 2 ohms it cuts the 800 watts down to roughly 650 watts or so and is easier on the 210s. it should sound great, hope you like it .

 

[Phil Horrocks]

I have a couple of those SVT 210's. They are 200 watts apiece. I have run Mesa 800 watt heads(set at 2 ohm) into them and as long as I was very conservative with the master they sound great and have some decent punch to them. I know the Ampeg 210s are 8 ohm, and 2 together are 4 ohms, but with the Mesa set to 2 ohms it cuts the 800 watts down to roughly 650 watts or so and is easier on the 210s. it should sound great, hope you like it .

Yeah, I’m only going to run them as a pair so they’ll be able to handle the horsepower of The Big Iron. I used to have a pair of these back when I had a V-4B RI, I think I like them even better now with the SVT.