• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

New Classic Vibe Basses really that bad?

I've heard others say that the neck profile is identical between them, but my 70s feels thinner front to back. It might be an optical illusion due to the binding, but it feels like a different profile, IMHO. I haven't measured to verify though. As I mentioned previously, the 70s was built in Indonesia, the 60s in China. (Both 2022 models). My 70s is DEFINITELY lighter. Aesthetics and woods aside, they sound nearly identical to my ears.
 
I have a couple CIC CV’s (2008/2012) both top notch instruments, my most played basses by far, the fit/finish/feel with slightly rolled board and vintage frets, solid necks and solid electronics.

I also agree the Indo CV’s feel like rebranded VM’s (which I also own). I have a few Indonesian CV’s, P’s J’s 60’s/70’s great basses (for the money).

It is my experience that the necks on the current Indo’s seem less stable, the truss adjust/neck wood. I have a couple that need constant attention so those wear different necks now, fender replacement neck and a Mark Hoppus neck, they
are awesome now, the Indonesians body finish/paint on the ones I own are great.

I do have one Indo that is still stock, that one is a solid bass “as is”, all that said the Indo CV basses are great “for the money” the 1st. gen Crafted In China are just great instruments period. All stock.
The OP has made up his mind and also has read a lot more bad posts than good which is not supported by this thread. Why he continues to beat this horse is beyond me.

@Ralferator it sounds like no matter which model you buy there is going to be problems, at least for you.
 
I've heard others say that the neck profile is identical between them, but my 70s feels thinner front to back. It might be an optical illusion due to the binding, but it feels like a different profile, IMHO. I haven't measured to verify though. As I mentioned previously, the 70s was built in Indonesia, the 60s in China. (Both 2022 models). My 70s is DEFINITELY lighter. Aesthetics and woods aside, they sound nearly identical to my ears.

So your 2022 60s P bass is made in China? But quality wise you think both are the same?
 
The OP has made up his mind and also has read a lot more bad posts than good which is not supported by this thread. Why he continues to beat this horse is beyond me.

@Ralferator it sounds like no matter which model you buy there is going to be problems, at least for you.

It seems like you didn’t read the thread. Strange also that you are talking in third person about me.

Some people said that the Indonesian ones are not as good anymore while others said that they got good ones.

My conclusion is to try out myself and maybe order two to make sure to get one without bigger flaws.

If you don’t like people asking questions and trying to figure things out, why don’t you mind your own business instead of commenting then?
 
Last edited:
It seems like you didn’t read the thread. Strange also that you are talking in third person about me.

Some people said that the Indonesian ones are not as good anymore while others said that they got good ones.

My conclusion is to try out myself and maybe order two to make sure to get one without bigger flaws.

If you don’t like people asking questions and trying to figure things out, why don’t you mind your own business instead of commenting then?
It's your lie; you can tell it anyway you choose.
 
But you owning several of them with unstable necks that needed replacement doesn’t speak for their consistent quality if you aren’t extremely unlucky, does it?

I actually said they are great basses two of mine seemed “less stable” they didn’t need replacement, and they are/were still functional before they were replaced
they just needed frequent adjustments. Grab one (or two) and if one or both don’t work for ya return them. I think they are a great bang for the buck. :thumbsup:
 
Yes in my experience those old Japan made early 80s basses are hard to beat. It’s just also always a gamble if the neck is straight if you can’t test before. And then usually you can’t give them back
Years back there sat a cheap P bass in a pawn, cannot recall the brand but i knew it was Japan by the shape of the logo....it was missing strings etc but the neck was straight though it was on the heavy side for me...i bet it got marked way down eventually.

I dont hit pawns these days, probably a good thing lol! I did see a early Classic Vibe Strat for under $100, it was nice but the tinted neck and thick finish was sort of off putting.
 
using a good quality caliper, we're seeing tiny differences that are probably just production variations. they're definitely close enough to be the same neck, and they feel like the same neck. there are different fret markers and fingerboard woods.

'60s
Nut 1.515"
12th 2.255"

'70s
Nut 1.505"
12th 2.230"

Thank you!!! Yes probably the same. I even do like the fact that they are not all exactly the same. I like that there are variances in bass guitars because it makes them have an own character
 
I actually said they are great basses two of mine seemed “less stable” they didn’t need replacement, and they are/were still functional before they were replaced
they just needed frequent adjustments. Grab one (or two) and if one or both don’t work for ya return them. I think they are a great bang for the buck. :thumbsup:

I will. Probably two vintage white ones and will keep the better one. Maybe change the pickup for a Fender or Geezer Butler or even Dimarzio Model P and the pickguard for a black or mint green one. I think then I will be happy!

I have to say that I took a look at Fender Player Series Jaguar Basses and love them too. I am just afraid that with that thinner Jazz Bass neck their P sound also sounds thinner but I am not sure if this is true.