New to me cab, can't figure out spec

[LopezEG]

Hi. FYI total noob here:

Just picked up a new-to-me Aguilar 4x10 cabinet (for $50 - couldn't pass that up even though it is probably extreme overkill).

It took me a bit of searching to figure out which 410 line this came from as the written model number on the input panel has faded away, but I'm 99.9% sure it is an S410 (MDF cabinet, cloth cover, rubber corner surrounds, metal grille - also early 2000's seems age-appropriate given the overall condition).

Anyway - in researching the specs I see these came in 8 and 4 ohm versions - mine reads 6.1-6.2 when measured with a meter.

So - which do you think it is? Should I round up or down here? It doesn't matter much now as its the only cabinet I'm using but if I was to pair it with another should I just actually measure the resistance to figure out what is safe when daisy chaining them?

thanks!

ps I know pics or it didn't happen

 

[LopezEG]

...and I see the answer in the sticky thread. sorry for the spam.

 

[agedhorse]

Hi. FYI total noob here:

Just picked up a new-to-me Aguilar 4x10 cabinet (for $50 - couldn't pass that up even though it is probably extreme overkill).

It took me a bit of searching to figure out which 410 line this came from as the written model number on the input panel has faded away, but I'm 99.9% sure it is an S410 (MDF cabinet, cloth cover, rubber corner surrounds, metal grille - also early 2000's seems age-appropriate given the overall condition).

Anyway - in researching the specs I see these came in 8 and 4 ohm versions - mine reads 6.1-6.2 when measured with a meter.

So - which do you think it is? Should I round up or down here? It doesn't matter much now as its the only cabinet I'm using but if I was to pair it with another should I just actually measure the resistance to figure out what is safe when daisy chaining them?

thanks!

ps I know pics or it didn't happen

8 ohm nominal

 

[Jeff Scott]

...and I see the answer in the sticky thread. sorry for the spam.

Your post is not spam.

 

[Tommy Sparks]

$50.00!! That’s a no brainer.
I’d grab that even though the last thing I need is another cab.
It’s not over kill if you have a volume knob on your amp.
For years I used a 810 cab for practice.

 

[Tommy Sparks]

As mentioned above your post isn’t spam. Keep asking questions. Lots of folks on here will gladly help.

 

[Zooberwerx]

...and I see the answer in the sticky thread. sorry for the spam.

Does everything work as it should? That's a kickin' enclosure for $50. You won't need a second. Bonus points for the casters!

Riis

 

[yonkrz]

Had one years ago,if memory serves me correct it should be an (S410) MDF construction w/Stamp frame speakers, mine was a four ohm but yours should be an 8 ?