• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

nitro finish making the neck faster

I have a usacg neck finished by atkinson in nitro


the neck is not as fast, as either my reissue p nor my pedulla (which is probably the greatest neck i've ever played)

Can i sand the nitro neck with a very fine grit sand paper to make it faster or if i want it faster do i have to just refinish it in another finish?
 
Nitro is not as slick as modern finishes and depending on the chemistry of your hands it can even feel sticky. But before you think about sanding try a good polish first. Gibson Polish and Virtuoso Polish are designed for nitro and leave the neck feeling much more slick.

CAUTION: Don't use any cleaner or polish that contains silicone...ever! Silicone bonds with the nitro and makes finish repairs and re-spraying impossible.

If polish doesn't work to your liking, you can certainly sand the back of the neck and then apply an oil finish (tung oil or gunstock oil/Tru Oil) with relative ease.
 
TB is awesome as always! seriously
yeah the neck feels a little sticky to me. sticky enough to bother me.

um i'll try scotchbrite tonight - thats just the rough side of a kitchen sponge right?

Scotchbrite is those dark green plastic scrubby pads, sometimes they come on a sponge, usually they do not. Cheaper to get them without the sponge. You can get them at any grocery store.