Separate names with a comma.
Discussion in 'TalkBass Bazaar: Effects & Electronics' started by UncleFluffy, Feb 1, 2011.
i just want to know that how can use dual opamps like TL062 or TL072 in this circuit.
I buy most of my parts from Mouser. Here's their Indian page:
LM4250CN/NOPB Texas Instruments | Mouser India
you bought the wrong opamps. see if you can exchange them for TL061 and TL071
Hey all, ive built up an original fluffy board i had sitting round to put it into a pedal.
Ive added a true pybass setup.
But...upon hooking it all up it, the bass works while the pedal is off, but when switching on the sound pulses on and off...?
The pulse get faster or slower depending on how much bass i dial in.
Anyone have any ideas as to why?
can you share the layout?
you've made a mistake somewhere in the circuit. it happens. I've put this in pedals without any problems. check for continuity and bridged or cold solder joints
i actually think i wired the inputs/outputs the wrong way round....
switching jack would be the output on the original. I'll go for round two when the rest of my parts turn up
I would love to buy a pcb board preamp for my old musicman PreEB.
Does anyone know where I can find it?
I love especially the one of UncleFluffy... very well done!!
why do you want to replace it? you already have a great preamp. you want more output?
Maybe his is fried!
...yes.... that's right!!
It started to make noise using the bass boost
anyone know if you can still get this board? just bought a sub ray 5 for my studio and want to build this pre
I have one of these boards that I'm never going to use... pm me if you want it. Order me the parts and I'll build it up for you... after the holidays. Will probably regret posting this
Hey all, I got in touch with UncleFluffy a while ago to seek permission to post a share link on OSHparkcom. He very graciously agreed to that, and another TB'er cleaned up the Eagle file so that OSHpark's automated upload/parser system could render the graphics correctly. Unfortunately I can't remember which TB'er that was though. BTW, I would still encourage everyone to PM UncleFluffy first before they use the share link, just in case he is around and wants to offload whatever stash he still is sitting on. He deserves that much, no?
So here you go, with big thanks to UncleFluffy: OSH Park ~
is it still possible to order these boards from UncleFluffy?
I was after a couple.
The very last post in this thread, just before your post. Check out the link to OSH Park to purchase PCBs.
Thanks for the reply. I just did and have ordered a couple to experiment with.
A big thanks to uncle fluffy for the time taken to make this available.
It is very much appreciated..
I've combed exhaustively through dead links in two different threads - does anyone have a BOM on Mouser/Digikey/both that was created in the past year or so?
you will need to double check this, I made it up in 2014 it might not be complete, and there might be duplicate parts.