PF 500 with 4X10 + 2X10

[bassman75]

Good morning, after a concert for 200 people with this configuration I must say the following:
The PF 500 is a champion of tone, tons of compliments on this.
Place the 4x10 down on it and the 2x10 vertically, with the two mics, at no time stopped responding, obtaining good definition and punch.
My setting of the PF: comp -9, gain at 2 o'clock, low at 1, mids at 3, selector in position 3 mids, treble-10 and volume at 12.

In short not to be very large, the conclusion is that I am very happy with this set, and definitely for a concert of these characteristics, this has worked wonderfully.

 

[BassmanPaul]

You've had the cons for the setup. Just be careful and don't destroy your 2x10. :scowl:

 

[bassman75]

Put a pair of 8 ohm BP102's in the 2X10 wired in series, making it a 16 ohm cabinet.

Then every speaker will see the same power and all will be well.

Esto es interesante.........cuando pueda me gustaria que lo explique mas detallado.....
De todas formas por el momento todo funciona bien , pero......siempre es bueno sacar el maximo rendimiento de todo , desde ya muchas gracias .

 

[BassmanPaul]

Esto es interesante.........cuando pueda me gustaria que lo explique mas detallado.....
De todas formas por el momento todo funciona bien , pero......siempre es bueno sacar el maximo rendimiento de todo , desde ya muchas gracias .

You do and you'll have to wipe up after yourself!!!

 

[bassman75]

Apologies please!! I wrote what came to mind fast at work ....... sorry.
I am interested in what you said, so I wonder if a better explanation is possible, by the time this setup has worked very well ......... but it's always good to have on hand other possibilities to obtain the best performance of the team, thanks.

 

[BassmanPaul]

That's roughly what the Spanish to English translator on my Mac came up with.