• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Picked up Vintage Ampeg V-6 cabs? - Any info? PICS Inside

I picked up these two cabs earlier today - They are pretty large cabinets given that they only house 2x12" woofers.

Anyone have info on these? Good/Bad?

They are in decent shape, look to have original Eminence woofers -
 

Attachments

  • 8694026959_08baf1c7d2.jpg
    8694026959_08baf1c7d2.jpg
    26.3 KB · Views: 400
  • 8695147746_ce3fea1cb4.jpg
    8695147746_ce3fea1cb4.jpg
    32.2 KB · Views: 377
Those days were all kinds of strange so I could be way off here. But those are PA cabs in my book. Neat score though!


Figured from the horns that they were PA cabs - Loved the look when I saw them and had to pick em up. If anything I'll be "modifying" them this summer (The empty space between the 12" woofers and the Horn should be filled by something other than a tweeter IMO)
 
Oh come on. Don't ruin a unique vintage cab by trying to make it something it's not. Why are people always trying to do that on here? If anything, maybe just put some upgraded woofers in it (ie stuff that's reversible).
 
That is a VERY big box for a pair of 12s. You're going to be power-limited, the concern being over-excursion. My guess is back then the drivers they used would burn their voice coils before suspension damage could be done, so going with a big box gave them some decent bottom end and there was little risk to it. Also 5-strings were almost nonexistent, so there was little chance of suspension damage unless some genius decided to send a mic'd kick through them with the bass boosted. Make sure you run a VERY steep high pass filter, and set it to 45 Hz or higher.