• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Playing bass through an Ampeg V4

Link Removed

sounds awesome. I get that nice stoner fuzz at about 10 o'clock is that good, or should I be getting it when cranked up a little higher?

I should take it to a tube doctor anyway just to get it checked out.
 
I think about 11ish was the breakup point for me, but the volume increase between 9 and 11 was huge IMO. Still I've always found that your best bet with the V4 is plenty of speakers. I used either a 4x10, 6x10, or 8x10 and never really had a problem as far as loudness. Probably still a good idea to get at least a once-over by a tech when you have a chance.
 
This is mine with a countryman type 85 running as a speaker out DI. The volume was probably about 9:30, the 4x10 was just a stage monitor. The overdrive in the intro/chorus is a pedal, the verse is pretty clean:

 
I agree with the comments re: v4 over v4b the input sensitivity feature is definately more usable to me than the lo boost. When/If you go to a tech be sure you let them know you already like the sound you just want a safety once over. Many amp techs might assume you want your bass amp to run distortion free. With one of my first SVTs the tech found out I was only running 4 of the 6 tubes but I really liked the sound so I wish I didn't "fix" it. Used to think an SVT at the practice amp and a b15 in the living room would be a good setup but I love that midrange control on the svt/v4 and I wish I had bought it a looong time ago. Efficient speakers are the way to go what's awesome is that it will switch to 2ohms so get another 2x15 if you have a volume problem.
 

Latest posts