Pre-Wired Jazz Harness

[tb420]

4 pots, 2 capacitors, and 11 scars later, I'm beginning to think that I'm no good at soldering

I'd like to finish my project Jazz soon and was wondering if there was a place to buy a pre-soldered wiring harness. Just a standard passive Volume Volume Tone would be great. I have a control plate and knobs, but I've seen some that have already been mounted to a control plate. That would be great as well. I SHOULD be able to solder the pick ups to the pots myself.

The pickups will mot likely be Antiquity II's or NJ4's, if that makes a difference.

Thanks

 

[NKUSigEp]

Are you using flux?

 

[tb420]

Ya
My gun is super low heat. I think its like a child's jewelry making set or something

 

[alexgeddy]

Hi,

send me your parts and a plate ..or just the parts (pots, caps and the jack) and I will solder it for you no charge (you pay shipping both ways)

bill

 

[Craig_S]

Are you using flux?

huh? Are you soldering pipes?

 

[Jo6Pak]

I wouldn't even try to solder anything without flux.

OP: There are guyz on ebay that sell pre-wired harnesses. Search on 'bass harness' or 'bass wiring', etc.

 

[jza57]

Bayoucables.com Butch does clean work . He does all work himself so sometimes it takes awhile but its worth it .

 

[bhubb3rd]

Andy Rothstein

http://www.guitar-mod.com/rg_prewire_bassoption.html

PS - I have been waiting 2 months for a cable from Butch, my first one, so I can't tell you how good it is, but I hope it will be worth the wait!!

 

[Ryan Mohr]

Bayoucables.com Butch does clean work . He does all work himself so sometimes it takes awhile but its worth it .

+1

 

[koobie]

There's usually somebody on eBay selling complete pre-wired J control plates with pots, knobs, caps, the whole works for way cheap. I suppose some of them might be from guys who've upgraded to Audere or similar units.

But you can't beat alexgeddy's offer, very generous.

 

[NKUSigEp]

huh? Are you soldering pipes?

Solder enough of ANYTHING and you'll realize it's just easier to use flux the first time and get it right than to overheat the part or have a broken solder joint or whatever the problem may be.

 

[giglawyer]

Stan Hinesly has some great pre-wired harnesses. www.has-sound.com

THey also ship super fast.

 

[bhubb3rd]

According to Stan, he is not selling / doing the harnesses anymore.