/ Register

Problem w/ the Input

Discussion in 'Amps and Cabs [BG]' started by gotmule?, Jun 26, 2008.

  1. Jun 26, 2008 #1
    gotmule?

    gotmule?

    Apr 24, 2008
    For some reason, I can't plug the cord into my amp. Whenever I put the cord in, it pops back out. This is only in the passive input, the active works fine. I really need an answer quick because my band has practice tomorrow and a gig Saturday. It just started happening about 5 minutes ago. Any help would be appreciated.

    P.S. The amp is a Fender Rumble 60
     
  2. Jun 26, 2008 #2
    tbwilson

    tbwilson

    Dec 11, 2006
    concord NH area
    this happened to my behringer. It goes in fully and then when u play it pops out right?
     
  3. Jun 26, 2008 #3
    bongomania

    bongomania Supporting Member Commercial User

    Oct 17, 2005
    PDX, OR
    owner, OVNIFX and OVNILabs
    One of the metal tabs inside the jack is probably twisted. This sort of thing sometimes happens when a plug gets jammed in or pulled out at an angle. If you can unscrew the faceplate to access the inside of the jack, all you have to do is bend the tab back into place. Otherwise you're hosed.
     
  4. Jun 26, 2008 #4
    gotmule?

    gotmule?

    Apr 24, 2008
    I fixed the problem. I pulled the silver thing out with a screwdriver, and now it works fine.