• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Project cab questions

i have the chance to pick up an unloaded Epifani T310 cab for basically nothing. Cab has no speakers, tweeter or electronics. I know that ideally i should find exact replacements and rebuild it the way it was, but costs may dictate otherwise. I was interested in the GB Faital neo 10s from Avatar to put in there to create a 900 watt, 5.3 ohm cab for relatively cheap. Any other low cost, higher power, good sounding options?
 
I would be running either a Tone Hammer or GB Shuttle 9.0 through it. Am I better off just finding a used 4x10 that is already together? Budget is around $200 or so. The cab is $25. Faitals are $177 for 3, plus i would need tweeter and input jack panel to finish off the Epifani
 
Cheap Bastard Method:
you dont need an acutal crossover, just a HPF, which could be a lone capacitor...
3 Fatial's for $177 bucks, just do it.
I like the idea of a 5.3ohm cab for a Tone Hammer, as long as you dont use another cabinet.
Invalid Link Removed, $0 buck, im sure you can find better somewhere.
A jack is $2 at radio shack, and a flat piece of sheetmetal to mount it on is, well, everywhere.

Of course, I am reckless and impulsive so Ill try anything.
 

Latest posts