• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Recommend an isolated power supply for me (please)

Are you wanting try the diy approach or cable kits. mogami W2319 or W2524 the thin stuff will be good with G&h plugs.. or the lava mini cable are good ôr bestronics.. it's wormhole but those are good products.
 
Are you wanting try the diy approach or cable kits. mogami W2319 or W2524 the thin stuff will be good with G&h plugs.. or the lava mini cable are good ôr bestronics.. it's wormhole but those are good products.

Oh, sorry. I have a mix of patch cables now. Some thin cheapies, some Mogami, and some Planet Waves. I think I'm set in that department at the moment.
 
I'm overwhelmed.

I have the following:
2 Eventide H9 (9v, 500ma (or 12V, 300ma?) center positive)
1 TC Electronic Nova Dynamics (12v, 300ma)
1 Digitech JamMan XT (9v, 200ma)

Plus a bunch of pedals with (I think) normal low drain, 9v power needs:
Dr. Scientist Frazz Dazzler
3Leaf Audio You're Doom
3Leaf Audio Wonderlove Deluxe
Boss OC-2
SolidGoldFX Beta DLX
Darkglass B7K
Mooer Sweeper
Korg Pitchblack+
Submarine clone

13 pedals....I think that's everything. I use a pedaltrain 2, so there's some room underneath. I seem to have trouble finding a ps that works for the H9s and the TC Electronic compressor without going north of $200. I think my board is stabilizing now, but if I have to change out the Nova Dynamics for something that is 9v, I will. Or, more likely, keep the compressor and the looper on a separate board that gets used only sometimes (with maybe the Frazz and Submarine). But, it'd be nice to have something that works for all this. Thanks in advance!

I've had decent luck with the MXR ISO-Bricks. I didn't have any issue powering the H9s with them. Cheap too and easy to find. The downside is the cheap wall wart that powers them.
 
  • Like
Reactions: Honch
Cioks does a special one for Eventide users. Their stuff is pricy and very high quality.
The Eventide one has 4 inputs for 400 mA pedals.

Never had an issue with my pus*y or the clit and it offers two inputs for your H9s and feminists love me:
6101015_800.jpg
 
  • Like
Reactions: smperry
Just get three of the cheap ones off amazon itl be fine and cheap. I use them after having used the expensive stuff, particularly pedal power. They're not actually isolated but more so than a daisy chain. The ma regulation for each output leaves no ringing like a daisy chain. and those high ma and 12v ones will be covered.

I don't think the expensive ones are worth it, many many people surely disagree.
 
  • Like
Reactions: armybass
My Zuma lets me power my Cali76-C at 18v and has more than enough at each outlet for basically any pedal besides a Markbass Compressore the ability to chain Ojai'a to it and use one wall plug is a huge plus as well if you have more than 9 pedals and don't want to daisy chain.
 
  • Like
Reactions: CameronJohnson
Just get three of the cheap ones off amazon itl be fine and cheap. I use them after having used the expensive stuff, particularly pedal power. They're not actually isolated but more so than a daisy chain. The ma regulation for each output leaves no ringing like a daisy chain. and those high ma and 12v ones will be covered.

I don't think the expensive ones are worth it, many many people surely disagree.


Like most of these threads, the increase in price from a one spot isn't worth it until you're humming up a storm during an acoustic ballad.
 
Like most of these threads, the increase in price from a one spot isn't worth it until you're humming up a storm during an acoustic ballad.

I have about 8 pedals on my bass board, 12 on my guitar board, and 6 on my one man band looping board. With that many pedals, 1spots will ring and ring and ring like a torture room.

https://www.amazon.com/Caline-Guita...1505225244&sr=8-9&keywords=pedal+power+supply

I use these or one of the many different variations and they work fine, not a peep, I have 4 of them. I'm of the opinion that a $175+ way to give 9v/12v to 5 pedals is just not worth it.
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
I have about 8 pedals on my bass board, 12 on my guitar board, and 6 on my one man band looping board. With that many pedals, 1spots will ring and ring and ring like a torture room.

https://www.amazon.com/Caline-Guita...1505225244&sr=8-9&keywords=pedal+power+supply

I use these or one of the many different variations and they work fine, not a peep, I have 4 of them. I'm of the opinion that a $175+ way to give 9v/12v to 5 pedals is just not worth it.

100% agree. If you happen to be running more than 10 pedals however, you start paying for the convenience of using a singular unit as opposed to multiple units and potential current/voltage doubling. For reference, I use a decibel 11 hot stone which i think was 120 off amazon to power 10 pedals, one of which needs >400 mA.
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
I've had decent luck with the MXR ISO-Bricks. I didn't have any issue powering the H9s with them. Cheap too and easy to find. The downside is the cheap wall wart that powers them.

Thanks. I'd be happy to get an ISO-Brick but I didn't think it'd work with my 12v TCE pedal. Maybe that one needs to be replaced. It's complicating things.
 
100% agree. If you happen to be running more than 10 pedals however, you start paying for the convenience of using a singular unit as opposed to multiple units and potential current/voltage doubling. For reference, I use a decibel 11 hot stone which i think was 120 off amazon to power 10 pedals, one of which needs >400 mA.

That looks like a sweet unit for sure. Kind if a middle ground between how I roll on the cheap and the really good stuff. Can you use both the 9v and 12v that are together as long as the ma is covered?
 
you've got some nice pedals = don't skimp on clean quiet power .. !

I couldn't agree more. So many will happily spend a couple hundred £'s or $'s on a pedal but won't entertain the idea of spending anywhere near that on powering them cleanly.

Having said that though, plenty of pedals run just fine on a simple daisy chain. I personally run a combination of isolated and chained lines coming from my Strymon Ojai. The well behaved pedals are on daisy chains from a couple of the 500mA outputs and anything more fussy or power-hungry like my wireless system goes on its own output.
 
Last edited:
  • Like
Reactions: SLO Surfer