Replacement speakers for eden xlt

[Smu573]

We use the same horm/ diaphram on all of our cabs. It will not effect your impedance.

 

[Charles Fields]

Yes my bad 2-4ohm speaker's in paralell=8ohm's

 

[Charles Fields]

oop's i meant to say 2-4-ohm speaker's in series=8 ohm sorry!

 

[Smu573]

2 four ohm speakers ins series is 2 ohms. You where correct the first time.

 

[lbwdog]

2 four ohm speakers ins series is 2 ohms. You where correct the first time.

????? Maybe mistyped?
{2} 4 Ohm in parallel = 2 Ohms
{2} 4 Ohm in Series = 8 Ohms

 

[Smu573]

I did miss type, thanks

{2} 4 Ohm in parallel = 2 Ohms
{2} 4 Ohm in Series = 8 Ohms

 

[Hankthecrank]

Man i just rewirerd my eden and put to new speakon's on the cup it was alot trickier than i expected ,be sure to take a picture of the crossover before pulling it apart ,the horn is wirerd out of phase,and yes two 4 ohm speaker's wirerd in series= 8ohm's

 

[Jontom]

SMU573-
Does the crossover plate need to be changed in some way when doing an ohm conversion?

 

[Smu573]

No the crossover will remain the same.

 

[Jontom]

Thanks!

 

[aguacateojos]

Hey, saw this thread during a search and didn't want to make a duplicate of the same topic. I recently bought a used Eden 4x10 XLT - the morning after I got it home I plugged in and immediately noticed a rattle coming from the bottom-right speaker.

At this point I'm pretty sure it needs to be replaced. I not really in a place where I can spend $175 on a speaker but could manage around the $100 mark. I'm not really sure what specs to look for in order to find a replacement that will complement the other three. Any help would be greatly appreciated.

 

[dirkscalling]

can't go wrong with Black Widow's

 

[BassmanPaul]

can't go wrong with Black Widow's

@dirkscalling do you realise the post before yours was placed ten years ago? I would think that after all this time the point is moot!

Edit to add that if the particular Black Widow's parameters do not suit the eden cabinet, likely, then they will fail in short order. There is a science behind designing speaker cabinets. Ignoring that science a shoving some arbitrary driver into an existing box is a good recipe for failure.

 

[bobcruz]

Eminence makes a 10 that specifically targets the Eden sound--search here or Google for it.

 

[PawleeP]

No the crossover will remain the same.

So you can put 2 16 ohm 10's in parallel for 8 ohms in an Eden cab that has a crossover originally designed for 4 ohm total load for example; came with two 8 ohm speakers?

 

[PawleeP]

No the crossover will remain the same.

so the crossover for an total 8 ohm cab is same approximate specs as the crossover for a 4 ohm cab? I suppose these crossovers don't have HPF for the woofs?