• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Double Bass Running a Mic through a standard Bass Amp

Jul 4, 2014
1,735
3,716
Fort Worth, Tx
Disclosures
Endorsing Artist: Remic Microphones
Hello all,

I tried a few searches about running a mic (balanced) into a standard bass amp (unbalanced). Only one thread had a suggestion... and that was to use a small mixer. Probably not a terrible idea as it's potentially an easy way to get phantom power to a mic preamp, but is that the only solution out there? Any concerns about an impedance mismatch? Any tips from those that have tried it?

I'm looking at eventually upgrading my current amp (Amp PF500) to something that better fits my needs, but until that time I'd like to explore my options. To be honest, I don't absolutely have to have the mic as I'm currently using a Realist... but I'm always looking at other options because I am who I am and I accept that.

Thanks,

Chris
 
  • Like
Reactions: Ric Vice
I haven't used it personally, but I've seen the Radial SB-48UB suggested often for this purpose.

It seems to have been recently discontinued by Radial... Might want to snatch one up before they are all gone!
 
The mic preamp would be a good idea because the mic delivers a very low amplitude. Impedance is low, no problem, but the amplitude is way too low to be used, specially with a dynamic mic, and a condenser needs phantom power. If an am can deliver phantom power it should be able to handle the low input amplitude, but if not the mic preamp is what you need.