1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

schematics for yamaha rbx 375

Discussion in 'Pickups & Electronics [BG]' started by quahog, Apr 9, 2009.


  1. quahog

    quahog

    Mar 28, 2009
    i have the "battery problem" with an rbx (it dries out very quickly) and i find out it is a wiring problem that rbx bases seem to have so i need the schematic for Yamaha rbx 375 to fix it. I tried to mail to the dealer but no response came from them so if there is anybody that could help me i would be most grateful.
     
  2. misko_mtc

    misko_mtc

    Oct 17, 2007
    you don't need scheme. just look up two wires on input jack, minus (-) iz on the wrong place. put it on other free place and that's all...
     
  3. The negative terminal on the battery should be going to the ring terminal of the output jack.

    Use an ohm meter to make sure that there is an infinite resistance between the ring and sleeve terminals with the bass unplugged.

    As stated above, you don't need a schematic for this type of issue.
     

Share This Page