• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

SG & EB Bass Club

I forgot to mention, the strings are fresh D'Addario Flex Steels. And it's an Epi EB0 body with a homemade 32" scale three-piece maple neck and Macassar ebony fretboard. 500k volume pot, three-way switch.

So the TBPlus pickup is in an EB3-like bridge position?

Also, I just checked Sentell's website and it says the Unbucker doesn't fit under a chrome cover. How do you have your Unbucker mounted and/or covered? Is it just sitting there, naked to the elements? :woot:
 
I made the same mistake...:woot:...which wouldn't have been a mistake IF I were not actively looking for P-90 pickups to replace the very unimpressive (IMO) stock ones on my 2010 Les Paul Special....now my head is going to be spinning for the next three weeks...

Getting a bit off topic, but real briefly, if you're talking about a guitar, you could put mini-humbuckers in or mix 'n match like Neil Young (I actually ended up going opposite to Neil as I preferred a neck mini-him to a neck P-90 and a bridge P-90 to bridge mini hum, ymmv). Overall, P-90s seem to work best for hollows or semi-hollows to me (again, ymmv). Meanwhile, I actually went ahead and had the P-90 sized routes in my MelodyMaker routed out for regular humbuckers.

Okay, back to bass
 
  • Like
Reactions: ajkula66
Okay, back to bass

Yeah, my apologies to everyone here for taking the thread into the OT land, but Sentell's choice of (guitar) soapbars could give an Aspirin a migraine...

I'm beyond intrigued with the Unmudbucker, the problem being that I currently don't own a bass that requires one...maybe buy another EB/SG...yeah, that would be a preferred TB solution, I reckon...:smug:
 
I think i'll take my SG bass in for a setup tomorrow — its a bit high/tiring on my fretting hand. I just did my own setup on my P bass a few months ago, and then on another, but something about the SG Bass's 3 point bridge has me hesitating. Maybe watch it done first.

Plus the string end windings are on the bridge saddles on each string, so I feel a bit defeated before even starting, lol. Anyway, hopefully the tech can get it playing easier and I'll go from there. I know I should really wait a few weeks until the summer weather breaks, but the wife is otherwise occupied this weekend so this looks like my big opportunity!
 
I think i'll take my SG bass in for a setup tomorrow — its a bit high/tiring on my fretting hand. I just did my own setup on my P bass a few months ago, and then on another, but something about the SG Bass's 3 point bridge has me hesitating. Maybe watch it done first.

Plus the string end windings are on the bridge saddles on each string, so I feel a bit defeated before even starting, lol. Anyway, hopefully the tech can get it playing easier and I'll go from there. I know I should really wait a few weeks until the summer weather breaks, but the wife is otherwise occupied this weekend so this looks like my big opportunity!
I own 1 of each Hipshot and Babicz and I vote Hipshot for the SG bass.
 
  • Like
Reactions: Craig4003 and dmt
@dmt :

Your bass, your $$$, your call by all means, but if I were in the possession of a pre-2014 SG bass I would be looking into a Hipshot or Babicz replacement bridges. I was never all that keen on The Oil Rig design to begin with, and these two options really make it seem incredibly out-of-date...

My $0.02 only...
I picked up a Hipshot for my 2013 on eBay for $78. The equivalent Babicz was about twice the price. Scheduled for delivery today. Need to stop by AZ Music Pro and pick up some new strings.

Hipshot® SuperTone Bass Bridge~4-String 3-Hole~fits Gibson Bass~Chrome~Brand New | eBay
 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
@dmt :

Your bass, your $$$, your call by all means, but if I were in the possession of a pre-2014 SG bass I would be looking into a Hipshot or Babicz replacement bridges. I was never all that keen on The Oil Rig design to begin with, and these two options really make it seem incredibly out-of-date...

My $0.02 only...

Oil Rig design, lol. I'll remember that! :roflmao:

Mine's 2014 actually, with the 120th Anniversary inlay. The next year got the new bridge, fwiw
 
  • Like
Reactions: ajkula66
It is my understanding that the original strings Gibson shipped on the SG (in 2013, at least) are 45-105. Medium scale GHS Bass Boomers come that gauge. Even their recently lengthened short scale string sets are too light. I do not want to have to replace/refile the nut.

Do I have the default string gauge for a 2013 SG correct?
Quoting myself...

I just found an old post in the Gibson forum what confirmed 45/65/85/105 for the string gauges, but specifically failed to confirm the rumored source (D'Addario).
 
Thanks for the sound clip.
No prob.

dmt has asked twice and you haven't answered, so I'll ask. Do you have the large mudbucker-sized TB Plus in the bridge position?

I haven't answered because the answer isn't as straightforward as you might think - that info was in my introductory post about my Sentell: SG & EB Bass Club
 
Also, I just checked Sentell's website and it says the Unbucker doesn't fit under a chrome cover. How do you have your Unbucker mounted and/or covered? Is it just sitting there, naked to the elements? :woot:

I'll add a bit of detail here. Looking at Sentell's website, it's not immediately obvious whether or not the plexiglass cover is removable. I had originally thought about removing it and plopping the chrome cover over the actual pickup (I'm a sucker for chrome). When I got the pickup I discovered that the plexiglass cover is very firmly attached to the pickup, so no go on removal.

Or so I thought. While I haven't tried to actually separate the cover from the pickup, based on my experience with the friction fit of the poles, I now believe that the (pretty tight) friction fit of the poles in both the cover and the pickup are what's holding everything together.

The plexi-cover look is certainly different, definitely non-traditional, but I'm kinda digging it! I'm thinking about ordering a second one for the not-quite-bridge position, as I find the TB Plus sounds pretty disappointing in comparison.
 
  • Like
Reactions: dmt and Nebula24
I picked up a Hipshot for my 2013 on eBay for $78. The equivalent Babicz was about twice the price. Scheduled for delivery today. Need to stop by AZ Music Pro and pick up some new strings.

Hipshot® SuperTone Bass Bridge~4-String 3-Hole~fits Gibson Bass~Chrome~Brand New | eBay
Bridge arrived as promised. Really well packaged!

Stopped by the local music store (Arizona Music Pro) to pick up a set of strings. I wanted a 45-105 set, so hopefully, I won't have any issues with the nut. Don't wanna do no refiling. I can't draw a stickman with a ruler, and I can't plane a square edge, neither.

The owner plays Curt Mangan strings and highly recommended them. $23, tax incl., at the store. $28+ online. Good local store owner!

The bridge and strings are going on tomorrow. Wish these fumblety fingers "bon chance"!

Best Boutique Quality Strings for New and Vintage Acoustic, Electric, Guitar, Bass, Mandolin, Banjo, Pedal Steel, Bajo Sexto and Quinto, Ukulele, Curt Mangan Made in USA - Custom Strings Great Gifts for Guitar Players

45-105 Nickel Wound Light 4-String Bass Set

45_105__59898.1396472109.jpg
 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.