Show me your compact pedalboard setup

[vdub75]

I'd go for the spectra, knob at 9 o clock, I really like that!

Dirt: The OJ is a cool pedal if you like that specific Sound! still got one in the drawer

 

[javi_bassist]

Line6 Relay G30-->TC Electronic Hypergravity-->Aguilar Fuzzistor-->TC Electronic Corona Chorus-->TC Electronic Polytune 2

 

[winterburn69]

Thinking of swapping out my Empress for a TC SpectraComp, and Joyo Orange juice.

Does anyone have any other suggestions for small comp and drive pedals that might fit there? Only other drive Pedal I considered was a Mooer Spark series.
View attachment 3153704

Not sure how any of these will translate for bass usage, but...

MXR Sugar Drive
Ibanez Mini Tubescreamer
Keeley Red Dirt

Malekko also has a mini Compressor

 

[Uche_bass]

Newer, bigger, dirtier, more complicated!
Bass-->Tuner --> Splitter with Hpf and Lpf. From Hpf out to OCD. From Lpf out to preamp. Then they both combine again and go to the amp

 

[Das Jugghead]

Newer, bigger, dirtier, more complicated!
Bass-->Tuner --> Splitter with Hpf and Lpf. From Hpf out to OCD. From Lpf out to preamp. Then they both combine again and go to the ampView attachment 3154472

Did you build the Splitter with HPF and LPF?

 

[Uche_bass]

Did you build the Splitter with HPF and LPF?

Yes I did. I still have to fix some volume problems (that I compensate with the pedals's volume for now) but right now it does the job. I put a cap selector in each filter, so I can choose between a cutoff freq of ~863Hz and ~1,7kHz. IIRC I have it set to 1.7k on the LPF and 863 on the HPF, so I have a very nice LoMid boost with everything off (although the volume kind of skyrockets)

 

[Das Jugghead]

Yes I did. I still have to fix some volume problems (that I compensate with the pedals's volume for now) but right now it does the job. I put a cap selector in each filter, so I can choose between a cutoff freq of ~863Hz and ~1,7kHz. IIRC I have it set to 1.7k on the LPF and 863 on the HPF, so I have a very nice LoMid boost with everything off (although the volume kind of skyrockets)

That's really cool. Did you design it yourself?

 

[Uche_bass]

That's really cool. Did you design it yourself?

I found the design of basic passive HPF and LPF, used an online calculator to see which resistance and capacitors would give me approximately the frequencies I wanted, and then modified them to suit my needs (cap change and signal splitting)

 

[Das Jugghead]

I found the design of basic passive HPF and LPF, used an online calculator to see which resistance and capacitors would give me approximately the frequencies I wanted, and then modified them to suit my needs (cap change and signal splitting)

Impressive!

 

[Uche_bass]

Impressive!

Thank you!

 

[BassIsFun17]

 

[Blu bro]

here is where I am at with my board at the moment...



few changes planned... Eventually i would like a MBD-1 (to replace the Tech 21 XXL), a Hudson Broadaster (to replace the Pork Loin potentially) and another Dunlop Mini Exp for the Moog 101

 

[mattattack187]

Don’t have as much time to play these days so I only have the essentials set up. Usually go back and forth between the PBDDI and VT Deluxe.

 

[mostvaliant]

Just finished putting the finishing touches on my board. Upgraded the Origin Compact Deluxe to the Compact Bass. The Two Notes Le Bass is amazing and pairs well with the Shift Line Buzz. Tonal Recall for fun.

 

[redstrand]

Second and third combinations. I’ll be building some ikea boards for these.

 

[Feral Feline]

Newer, bigger, dirtier, more complicated!
Bass-->Tuner --> Splitter with Hpf and Lpf. From Hpf out to OCD. From Lpf out to preamp. Then they both combine again and go to the ampView attachment 3154472

Yes I did. I still have to fix some volume problems (that I compensate with the pedals's volume for now) but right now it does the job. I put a cap selector in each filter, so I can choose between a cutoff freq of ~863Hz and ~1,7kHz. IIRC I have it set to 1.7k on the LPF and 863 on the HPF, so I have a very nice LoMid boost with everything off (although the volume kind of skyrockets)

¡CHE! Buena Onda!

Re Copado


That's the extent of my Argentinian-Spanish, gleaned from a good friend from BA.

How are you mixing the two signals back together, JFET, op-amp or...?

 

[ferarayabass]

Hey guys! Here is mine!

Pedaltrain Nano Plus
Boss Tu-3
Aguilar Filter Twin
Empress Compressor
Aguilar Octamizer
Darkglass B3K
Strymon Ojai R30

 

[Uche_bass]

¡CHE! Buena Onda!

Re Copado


That's the extent of my Argentinian-Spanish, gleaned from a good friend from BA.

How are you mixing the two signals back together, JFET, op-amp or...?

Jajajaja muy bien!
So far, very terribly. The 2 input and 1 output jack on the "mixer" have their hots soldered together, and their grounds too. When I get the money I'll buy a nice box and probably an op-amp to make a better mixer

 

[JohnnyBottom]

Im done, at least for now. When playing with 1 group I need some intermittent overdrive, Ill put my
VTBass on the floor. This guy stays on the amp, and looks a bit cooler when I angle it down in front of the Quilter which I dont need to touch.

 

[JakobT]

And here’s mine. Boss TU-3 tuner>EBS Fuzzmo>TC Electronic SpectraComp.