• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Show your Pedaltrain juniors!!!

#281
Here's mine!

1d767afb.jpg
 
#282
Nice collection of Aguilar stuff )))
Is your ToneHammer velcroed to the board too? I guess if you remove its feet to do that, it would be very inconvenient to put it on the floor (if you decide to take it off the board for some reason), because of that nice little screw that fixes the battery cover...
 
#284
pedal-line-friday-11-19-ken-stern.jpg


Here’s my path… Bass > Korg Pitchblack tuner > Boss PH-1r Phaser (Phasers * to me anyway – are more like Wah pedals than modulation as they cut or notch a frequency that is swept to electronically so I put it early in the chain) > Tech 21 VT Bass which I use primarily for OD and some distortion and tone shaping rather than pre-amping. If I was pre-amping with it I would probably put it at the end of the chain just before the looper.) > Analogman Standard Chorus which has an optional “Deep” toggle switch on it which makes it sound significantly better with a bass when it’s engaged. I also run it at 18v for more headroom. This is really the ultimate bass chorus. > Boss BF-2 Flanger (there is a bass version of this but I feel this non-bass version sounds better) > Boss DD-2 Delay which I had modded by Dan at This1smyne to have more a tape-like effect with the flick of a switch. Last on the chain is a Boss RC-2 Loop Station (now replaced with a RC-3) with a custom This1smyne duel footswitch. I have all of this mounted on a Pedaltrain Jr and powered with a TRex Fuel Tank Jr. I mounted the Fuel Tank Jr. invisibly under the board using 3M Dual-Lock.

Will be mounting my new Darkglass B3K shortly to handle the OD/Distortion chores. Will probably move the VT to just before the RC-3 at the same time.
 
#285
I finally did it! Haven't fastened the patch cords with wire ties yet.

PTJR-Pulsarsm.jpg


The signal path is a bit complicated because of the custom switcher of my own design :cool: OK, here it goes:
- 4-string semihollow > Input A
- 5-string > Humphrey Audio Ultra Bass Smasher > Input B
- Send > EHX Pulsar > EHX Clone Theory > Return
- Output > Boss DD-6 > TC Hall of Fame > Aguilar Tone Hammer

The ToneHammer just stands upon, I haven't put it on velcro. Maybe sometimes I will, maybe not. Sometimes I don't take it to rehearsals (hell, it is heavy!), sometimes I need it but I do not need FX... and its bottom would become very inconvenient if I took the rubber feet off and put velcro on. So now it just stands upon.

The other thing that I do not want to carry around unless I really need it, also because it's too heavy, is the Morley wah. It lives off the board. I also use EHX Little Big Muff, but I do not need it simultaneously with the Pulsar. I play in two bands, in one of which I never need the Pulsar, and in the other I never need the LBM :) So I'm just going to swap them when I need to.

PTJR-LBMMorleysm.jpg
 
#286
hurm. been thinking of picking up a smaller board to pair with my PT-2 instead of using a PT-1 with it.

i'm too lazy to thread scuba if this's been covered, but is there room underneath for a PP2 or Supah Charger like on the PT-1's and 2's?

murrrrrrrr?
 

Latest posts

Top Bottom
Back