Simple question about glueing a cab

[Thunderchicken]

I have a pretty new Acoustic 4x10 cab and the edges of the covering on the back of the cab are starting to curl up. They aren't ripped or anything, just a crappy job of staying down.

Can anyone suggest the best kind of adhesive to put it back on so it will stay?

Much thanks in advance!

 

[HaMMerHeD]

Hm. I think the first thing I'd try is 3M #77 spray glue. They have it at Home Depot.

 

[Musiclogic]

I would use standard Weldwood Contact cement and a small paint brush. The spray is going to be tough to get under curling edges, the little 1/2 pint of contact cement with a small artist brush(I use wal Mart cheapies) will allow you into small areas without overspray

This is also available at Wal Mart, Home Depot, Lowes, Target etc.

 

[eddiemac]

I've had the same problem on my self-made cabs. The best solution I've found is a product called "E600" made by Eclectic Products, Inc. of Pineville, La. It comes in a 3.7 oz. tube, in black, (medium viscosity), and sticks to most anything; looks like silicone caulk - available at Amazon.

 

[Thunderchicken]

Thanks guys! Good ideas!

 

[Jazzdogg]

Medium viscosity superglue