Slave amp or power amp plugin to my peavey tour

[Bass4lyf]

I have a peavey tour 450 amp and im wondering how i can hook it up to a power amp, or to hook up a slave amp, ive read in other threads that you plug the power amp or slave amp into the line out of your amp, but im pretty sure my peavey doesnt have one, is there any other way i can do it??

The back of my amp has an Aux in, direct interface out, tuner send, foot switch, and an effects send and return loop.

 

[unclejam]

efx send is what you lookin for

send a line from the efx send to the input of the power amp

 

[Bass4lyf]

ok awesome thanks for that!

one more question, can i plug the slave bass amp into the effects send on my peavey??

 

[unclejam]

if you mean the part that is supposed to go to the speaker. No. if you mean the signal that yu just took from the efx send. yes

 

[Rick Auricchio]

You shouldn't patch the FX send into a normal instrument input on another amp, because the signal level will probably be way too high.

If you're asking about patching the other way 'round between the amps, take line out (or fx send) of the main amp into line in/power amp input/fx return of the slave.

 

[BbbyBld]

If you are going to use the effects send, make sure your power amp has enough gain. The effects send on the Tour heads does not have enough drive capability for some power amps.

You will need a power amp with a sensitivity of 0.6vrms or -2.22dBu or -4.44dBv.

If you want to use a slave amp, you can go from the send jack on the Tour to the input (with pad), return, or power amp input jack of a slave instrument amp.

 

[Bass4lyf]

ok thanks heaps guys

made it very clear