Small 4 ohm cab 300W SEARCH

[LagBox]

I have this Genz Benz Shuttle 3.0, and the 8T cab is a bit lacking in lows. I want to keep the rig small, and the only thing I've found is the Eden EX112/110. I've looked at the Aguilar 112s, but I can only find 8 ohm cabs.

any suggestions? thanks

 

[walterw]

get a second identical cab, it'll make way more difference than a few more watts into the one cab.

 

[B-string]

http://www.avatarspeakers.com/ SB112 availble in 4 or 8 ohms and NEO or ceramic magnet. Choice of tolex colors or Line-X.

 

[LagBox]

get a second identical cab, it'll make way more difference than a few more watts into the one cab.

I haven't seen a single STL-8T for sale online that wasn't the one I have now. I don't think they're being made anymore. All the stores that sold them list out of stock or discontinued.

Time to check ebay (again)!

thanks

 

[LagBox]

http://www.avatarspeakers.com/ SB112 availble in 4 or 8 ohms and NEO or ceramic magnet. Choice of tolex colors or Duratex.

Oh, I forgot about Avatar.

And it comes in ORANGE!

 

[agedhorse]

A Shuttle 10T or 12T in 8 ohms with the combo's 8" are proven to work well together, all of the cabinets in the Shuttle line are designed with this in mind. Phase response is similar enough (though greater between the 8 and either the 10 or 12.

I have seen some used ones available here on TB.

 

[LagBox]

A Shuttle 10T or 12T in 8 ohms with the combo's 8" are proven to work well together, all of the cabinets in the Shuttle line are designed with this in mind. Phase response is similar enough (though greater between the 8 and either the 10 or 12.

I have seen some used ones available here on TB.

Whoa, the man himself.

I didn't know that, I'll look around. Thanks

 

[walterw]

there you go!

you might even find that the 10" or 12" version of the cab ends up being enough by itself, even though it's still 8Ω.

the first little 4Ω cab that springs to mind is the hartke single 12 that switches between 4 and 8.

 

[George Mann]

The Eden EX series is hard to beat.

 

[BawanaRik]

I have this Genz Benz Shuttle 3.0, and the 8T cab is a bit lacking in lows. I want to keep the rig small, and the only thing I've found is the Eden EX112/110. I've looked at the Aguilar 112s, but I can only find 8 ohm cabs.

any suggestions? thanks

EA Whizzy. Check with Gollihur