so if you're going to slam your rig into hyperspace at some point, the right thing to do is inform them that will happen, and then they can check your volume at its loudest and set your level accordingly.
will do, thanks for the tip
bassophil said:The biggest problem with higher volumes than your "normal-in-the-mix-sound" is that the sound guy needs to set the gain on the board with enough headroom, because clipping sounds (i.e. brick-like wave forms) are not so healthy for PA's.
So when you start with your loudest setting the soundguy can level the gain according to that and then set your actual volume with your lines fader during the band sound check/the first song etc.
thank you for the explanation!