Anyone else get their Hub freeze when a midi clock is being sent or when using an expression pedal ?
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Source Audio Hub - help
- Thread starter ilansgroove
- Start date
Adamixoye
A PT Pro is cool for worship, right?
- Apr 9, 2012
- 18,158
- 69,338
- Disclosures
- Occasional Beta Tester for Confusion Studios, Singular Sound, and Source Audio
I used to have issues with my Hub freezing. Eventually I changed my MIDI routing and updated the firmware. Maybe do the latter and say what you have in the MIDI chain?
Any chance you have a Kenton midi splitter/merger anywhere in your midi chain? It wasnt with a SAHub, but I had it reek havoc on my Helix when a MIDI clock was on the wire, had to get custom firmware from Kenton to fix it.
I actually have the MacBook going into my db11 switch doctor =>hub=>H9
i have the aftershock and C4 connected to the Hub
whenever the C4 is set to follow the midi clock - the hub freezes and I have to reboot it , and it won’t send any commands to the pedals until I stop Ableton and reboot it
i have the aftershock and C4 connected to the Hub
whenever the C4 is set to follow the midi clock - the hub freezes and I have to reboot it , and it won’t send any commands to the pedals until I stop Ableton and reboot it
Switch dr does not produce midi clock
the H9 has no issues with the midi clock coming from ableton
the H9 has no issues with the midi clock coming from ableton
Gibs210
Commercial User
- Aug 31, 2019
- 850
- 875
- Disclosures
- Part time Tech Support for Source Audio effects
Try connecting a usb straight to the hub to send midi clock, see if it behaves any differently.
Gibs210
Commercial User
- Aug 31, 2019
- 850
- 875
- Disclosures
- Part time Tech Support for Source Audio effects
You aren’t connected to a usb hub are you, just straight to the computer? Also sufficient current going to the hub from your power supply?
Gibs210
Commercial User
- Aug 31, 2019
- 850
- 875
- Disclosures
- Part time Tech Support for Source Audio effects
It’s probably the usb hub causing problems, try connecting straight to the computer.
It does the same thing even when I’m not using usb ... just midi straight out of the sound card to the board
