Source Audio Sourcerers Society (S.A.S.S.)

[Yurtra]

Yep!

Probably a waste of a preset in the real world, but if one were to set the blend knob on the reverb to "completely dry" and subsequently start using the expression pedal to control the output volume, would this work exactly like a typical volume pedal, plus selectable start and stop points for the sweep?

 

[itswac]

Yes, the output does control the entire signal on the Reverb.

 

[itswac]

However, the output does not go ALL the way to zero so that will present some issues.

 

[moishelichtfuss]

So...the reverb arrived and I like it. On 4 and on 6 strings. Here it is with the little home set-up.

(Just noticed that my wastebasket also found its way onto the picture somehow.)

 

[itswac]

Right on! Can we post that on our Facebook page?

 

[moishelichtfuss]

Uhm...of course...if the trash don't bother you

PS: I didn't mention, of course, that I also got the expression pedal. Both have been available in Germany since last week.

 

[4StringAxe]

I have a Soundblox BEF on the way. Will this be ok to power on a Gator pedal boad with a G-BUS-8 power supply, or might I get interference when I use the wired hot hand ?

 

[rsmith601]

I have a Soundblox BEF on the way. Will this be ok to power on a Gator pedal boad with a G-BUS-8 power supply, or might I get interference when I use the wired hot hand ?

I have used that set up before with no problem. The wired hot hand is very quiet. Have fun!

 

[4StringAxe]

I have used that set up before with no problem. The wired hot hand is very quiet. Have fun!

A answer from the man himself ! Thank you, I am really looking forward to this. The versatility of this pedal looks to be out standing. Can't wait to see what kind of madness can be had with the hot hand

 

[willbassyeah]

so i have the source audio bass envelope filter, i was thinking of buying the sounblox2 multiwave bass distortion but can i actually, daisy chain the hot hand from sensor out of sounblox 2 to the sensor in of my source audio bef? mine is not the pro version

 

[Smallequestrian]

so i have the source audio bass envelope filter, i was thinking of buying the sounblox2 multiwave bass distortion but can i actually, daisy chain the hot hand from sensor out of sounblox 2 to the sensor in of my source audio bef? mine is not the pro version

The answer is still the same from the last thread you asked in.

 

[rsmith601]

so i have the source audio bass envelope filter, i was thinking of buying the sounblox2 multiwave bass distortion but can i actually, daisy chain the hot hand from sensor out of sounblox 2 to the sensor in of my source audio bef? mine is not the pro version

The SB2 has sensor in and sensor out. The BEF SB1 has sensor in. So long as the SB1 BEF is at the end of the chain, you are all set. SB1 is the end of the line!

 

[willbassyeah]

The answer is still the same from the last thread you asked in.

hehe sorry, some asked me to ask in this thread instead

 

[willbassyeah]

wait so by daisy chaining the pedal means i can control 2 pedals with the hot hand at the same time? so wad if i want to control only 1 of the pedal only with the hot hand? do i need to get 2 hot hand wireless?

 

[itswac]

Even when they are connected, you can still bypass one pedal or set one to a non-hot hand mode without disrupting the hot hand signal.

 

[Basehead]

wait so by daisy chaining the pedal means i can control 2 pedals with the hot hand at the same time? so wad if i want to control only 1 of the pedal only with the hot hand? do i need to get 2 hot hand wireless?

No. Usually, I just hit the "HH Enable" button on the Multiwave to turn off Hot Hand control for that pedal, since it usually will be on or off for a song. For my BEF Pro, I have presets for the ones that I want to use with the Hot Hand.

Hope this helps...

 

[CopperheadLXXIX]

For those that got the expression pedal, did you also get the HH cable? I was expecting mine to come with one...

 

[itswac]

For those that got the expression pedal, did you also get the HH cable? I was expecting mine to come with one...

Your dual expression pedal did not come with an 1/8th inch sensor cable?

 

[CopperheadLXXIX]

Your dual expression pedal did not come with an 1/8th inch sensor cable?

No-- I triple checked the box and the packaging. I ordered it from Amazon.

 

[itswac]

Odd...send me an email at [email protected] with your address and i'll send one to you today.