Splitting Clean/Dirty live

[dcurran]

Hey Justin! I'm curious if you split your signal live. I have to split mine for the music I play and I've encountered a few problems with phasing. I've used the parallel out on a sans amp and I've used a Y splitter pedal and keep having the same problems. Just looking for something that has 2 outputs so I can send to 2 different DIs. Thanks for any help!
David​

 

[vegas532]

Have you tried something like the Radial Big Shot ABY? Reversing the phase of one of the channels should help solve this issue.

 

[jmjbassplayer]

Phase reverse alone will not likely solve this. That's just 0 degrees or 180 degrees. You might want to have a phase tool from Little Labs or Radial in the mix and then you can infinitely adjust for correct phase...just put it on one of the lines and you'll be straight. I don't split my signal tho...just DI and amp. Sometimes clean/dirty DI, but these days I'm only doing dirty. Whenever there's phase problems, they just use the Waves InPhase at FOH at the board and that fixes it if everything else fails.