Sterling Ray4 tuners

[Tinkachu08]

Hey Everybody, I'm changing the hardware to black. Does anyone know if these tuners (see photo) from "Allparts" will fit.? I was told the size tuner on a Ray4 is 1/2", only info on allparts is they weigh 1.8oz/51g each. No dimensions or diagrams.

Model# TK-7567

Thanks,
Lana

 

[Pyrrho Epoche]

It states 1/2 inch on here, if you scroll down to product decript:

TK-7567 Single Lightweight Wide Post Bass Key

Single lightweight bass key 1.8 oz., screw-in bushing, 1/2" wide post, 20:1, bass side.

www.allparts.com

 

[Tinkachu08]

I got that part, no diagram showing how big the back side of the tuners are..ie: 43mm across 18mm between screw holes etc

 

[Tinkachu08]

I bought a set of no name tuners on ebay.. they looked like the perfect size all the dimensions matched up...HOWEVER the seller forgot to mention that each tuner without the bushing or screws weighted 127 grams each... Are you kidding me.

 

[Pyrrho Epoche]

Might need to email all parts and just ask them, or just order them and send them back if they don't work. The 1/2 part will fit. If the screw holes do not line up petfectly, you can drill new pilots. That is what I would do.

Somebody will know better than I do though.

 

[Tinkachu08]

Might need to email all parts and just ask them, or just order them and send them back if they don't work. The 1/2 part will fit. If the screw holes do not line up petfectly, you can drill new pilots. That is what I would do.

Somebody will know better than I do though.

I have emailed them no response, I'll call them tomorrow

 

[CoughSyrup]

I have emailed them no response, I'll call them tomorrow

Their customer service center is in Houston. They may be a little preoccupied at the moment.

 

[Tinkachu08]

Their customer service center is in Houston. They may be a little preoccupied at the moment.

Thank you for the response. Pretty Sure they are busy right now