SVT-7 Pro Repair Question

[limb]

ok thats fine with the schematic. but we need a solution for ampeg svt-7 a tecnical tips to eliminate those problems that have many owners of svt-7s. even a recall of the unit or money back!!
rev cc have the same problems also!!

i have the same problem also.

we have pay for a new amp

we will pay to fix it in the future after 1 or 3 years?

my local waranty was for 2 years and my amp stops the 3rd!! i think 10 hours of use in practice room.

what about this? could we ever have the svt-7 in working condition? or we pay 1 month of work for a ampeg metal box?

 

[bassguppy]

Ampeg gives a 5 year limited warranty on the Pro series amps. Where are you located that they only provide you with a 2 year "local" warranty?

 

[limb]

i am from athens greece

 

[beans-on-toast]

my local waranty was for 2 years and my amp stops the 3rd!! i think 10 hours of use in practice room.

what about this? could we ever have the svt-7 in working condition? or we pay 1 month of work for a ampeg metal box?

Having a only a local warranty when the manufacturer normally offers a 5 year warranty stinks.

I would send an email to Loud and ask them why this is done. I would also politely ask, given the circumstances of the usage of your amp, if they would be willing to offer you an extended warranty to have this repair done. If there was a known defect that existed when your warranty was in effect, they might be willing to fix it for you.

When approaching a company with a request like this, it is important to keep a cool head. Explain the situation clearly, how often you used the amp, and ask them if they can assist you in some way to have your amp repaired under an extended warranty. They deal with issues like this on a case by case basis. It never hurts to try.

 

[limb]

Thanks a lot man will retry a second time because the first time I spoke with his employee the company told me that the guarantee has run for two months now and the repairs will cost me depending on the damage which had

 

[mnow]

have yoy fixed the problem with svt-7??

Adding the 12v tranny did help the small switching supply and it runs cooler now (I.E. it does not go into shutdown)

 

[mnow]

ok thats fine with the schematic. but we need a solution for ampeg svt-7 a tecnical tips to eliminate those problems that have many owners of svt-7s. even a recall of the unit or money back!!
rev cc have the same problems also!!

i have the same problem also.

we have pay for a new amp

we will pay to fix it in the future after 1 or 3 years?

my local waranty was for 2 years and my amp stops the 3rd!! i think 10 hours of use in practice room.

what about this? could we ever have the svt-7 in working condition? or we pay 1 month of work for a ampeg metal box?

Got some schematics for you here:

 

[cgoepel]

They do. All they do is make you agree to not post them on the net.

Here's my try at getting a schematic from Ampeg directly:

Hi,

Unfortunately we are only able to supply the schematics for our current products to our authorized service centers and distributors.

Sorry for any inconvenience.


[email protected]

1(800)258-6883 Ext. 1633

Loud Technologies Inc.

16220 Woodinville-Redmond RD NE

Woodinville, WA 98072

www.loudtechinc.com + Link Removed + www.ampeg.com
www.mackie.com + www.tapcoworld.com







From: [mailto:[email protected]]
Sent: Friday, September 2, 2016 10:20 AM
To: Technical Support <[email protected]>
Subject: Request Schematic for SVT-7 Pro



Hello folks at Loudtech,

I have a customer’s SVT-7PRO that needs repair.

I am a local guitar amp shop in the Baltimore area.

Could you please send me a schematic for SVT7PRO?

 

[cgoepel]

i think with all these numbers of cutting out and burned svt-7s ampeg sould be give schematics and intronctions to techicians all over the word because there are customers also out of us
that suffering with these problems and its out of there local waranty!!

Here's my 2 cents - A bit costly but gets the job done quickly.
Go to Fullcompass.com and order a Invalid Link Removed

 

[beans-on-toast]

Here's my try at getting a schematic from Ampeg directly:

Hi,

Unfortunately we are only able to supply the schematics for our current products to our authorized service centers and distributors.

Sorry for any inconvenience.


[email protected]

1(800)258-6883 Ext. 1633

Loud Technologies Inc.

16220 Woodinville-Redmond RD NE

Woodinville, WA 98072

www.loudtechinc.com + Link Removed + www.ampeg.com
www.mackie.com + www.tapcoworld.com







From: [mailto:[email protected]]
Sent: Friday, September 2, 2016 10:20 AM
To: Technical Support <[email protected]>
Subject: Request Schematic for SVT-7 Pro



Hello folks at Loudtech,

I have a customer’s SVT-7PRO that needs repair.

I am a local guitar amp shop in the Baltimore area.

Could you please send me a schematic for SVT7PRO?

This policy for current products was put in place a while back. The schematics for discontinued products are available online from their service portal: Link Removed.

 

[JimmyM]

Here's my try at getting a schematic from Ampeg directly:

Hi,

Unfortunately we are only able to supply the schematics for our current products to our authorized service centers and distributors.

Sorry for any inconvenience.

[email protected]

Yeah, old post and an old policy they no longer do.

 

[jeeptechfred]

Adding the 12v tranny did help the small switching supply and it runs cooler now (I.E. it does not go into shutdown)

Did you run it straight A/C to pins 4&5 or did you rectify and filter it?

 

[BassmanPaul]

Did you run it straight A/C to pins 4&5 or did you rectify and filter it?

@mnow was last seen here on September 3 2014. Just saying!

 

[netmics]

Hello,

I am tired about this amp. Ampeg have a serious project problem about the SVT7PRO, and that is what the electronic engineer said and is looking up my case. Is the third board burned supplied by Ampeg because of valid warranty. Now I want a fair solution about this. Does it happened to somebody here? What did Ampeg do in these cases?

Thanks