SWR Triad

[pat8553]

Hi,

can somebody tell me what the ohms are on the 10" driver only on the Triad cab? There are no labels on the back of the drivers, it is the original from what I gather, also it is a early model. pre fender late 90's.

 

[Lowbrow]

The Triad is a 4 ohm cab, so I'd guess that each driver is 8 ohms.

 

[asad137]

The Triad is a 4 ohm cab, so I'd guess that each driver is 8 ohms.

There's probably a crossover, so that's not a safe assumption.

The easiest thing to do would be to disconnect the driver from the rest of the circuit and measure its DC resistance with a multimeter -- it will read a little bit lower than the nominal impedance.

Asad