• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Tele/scpb-pickup modification

Hello!

I have two p-basses, but am thinking of modifying one instead of selling it and bought a telecaster-bass. And I know there is no limit to how many basses you can have, but I don't like too much stuff and the bass to be modified is nice to play on (Tokai PB60), but mostly play live on my Fender (CS63).

The modification requires a new hole for the pickup, but the problem for me is finding a pickup I like. Have tried a few different "scpb" basses/pickups, but think they sound too bright. For example Lundgren Vintage, the standard pickups in Squier Classic Vibe Precision 50's, Fender Sting signature and Fender Japan Precision '51 Reissue (2007).

Here is a sound sample I like (I understand that the amplifier also matters), and even if the sound on video is top, it is the type of sound I'm looking for, for that kind of music.


Any tips on pickups and amps to achieve this? I play mostly on a Fender Rumble 100, Fender Bassman TV15 or sometimes Ampeg SVT Classic on larger gigs. What would you say the big difference is between an original 50's and the above pickups?
I think the answer is to find someone who can wiring a pickup so it sounds like a vintage original 1950´s, then I'll solve the hole :) The best would be with a mudbucker shape, instead of a classic scpb.
 
think the answer is to find someone who can wiring a pickup so it sounds like a vintage original 1950´s, then I'll solve the hole
The original single coil was a very simple thing , alnico with a low wire wind count. They sound great :)

Modern 51 singles come with quite high wire counts, 9k ohm - 9.5k ohm being the norm. 50's singles were more in the 6k ohm - 6.5k ohm ballpark.



Thankfully you too can experience that low wire goodness for very little money :thumbsup: Head to eBay/Ali-Ex and search for 51 single coil , there's a host of sellers offering a 6.7k ohm, cloth push back, string wrapped alnico for around the $15 - $20 mark; they were $8 when I bought mine.

You might be able to mask the single coil under a mudbucker cover, I've a couple of them here so I'll dig them out then compare the single coil poles with the hole spacings. That'll be a task for tomorrow.
 
  • Like
Reactions: Kosmos
Good morning @Kosmos

News is not so rosy today :(

I located the single coil mentioned above at Guitar Parts Factory in Millersport OH which would save trawling through eBay/Ali-Ex. Sadly, being intended for Fender basses, the pole spacing is 54mm so will not fit either the Artec EBC-4N nor Gibson mudbucker covers; those having 51mm and 48mm pole spacings.

Going with the 51 single coil would entail either a scratchplate cut for single coil instead of split or a custom mudbucker cover.

While at Guitar Parts Factory I did notice they sell Burns Trisonic single coils. They have the low wire count, 6.7k ohm, and 51mm pole spacing so match the Artec EBC.

It would be possible to combine the 2 but having yet to install Trisonics in any bass I can't comment on the sound.


Links to each.



 
  • Like
Reactions: Kosmos
I located the single coil mentioned above at Guitar Parts Factory in Millersport OH which would save trawling through eBay/Ali-Ex. Sadly, being intended for Fender basses, the pole spacing is 54mm so will not fit either the Artec EBC-4N nor Gibson mudbucker covers; those having 51mm and 48mm pole spacings.

Going with the 51 single coil would entail either a scratchplate cut for single coil instead of split or a custom mudbucker cover.

While at Guitar Parts Factory I did notice they sell Burns Trisonic single coils. They have the low wire count, 6.7k ohm, and 51mm pole spacing so match the Artec EBC.

It would be possible to combine the 2 but having yet to install Trisonics in any bass I can't comment on the sound.

Hi!

Sounds good that the sell Burns Trisonic single coils with 6,7l ohm. Maybe you can send me a link here or private to that store and product?

Aha, do you have an example of "a scratchplate cut for single coil instead of split or a custom mudbucker cover"?

Thanks for your help!
 
Last edited: