TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
It's meant to drive two of thoseThe head doesn't look to comfortable sitting on that cabinet.
Hey guys, one more question. I’ve been playing my Cherry Tbird exclusively since 2012, and I love it. But, since I’ve gotten my Blackbird lined out I’m wondering if I wired my cherry bird like my Blackbird would it sound a little more aggressive? I never use the tone or volume pots anyways. So why not just put in a kill switch like my Blackbird?? Where would I find a good on/off switch to wire in, and what works if I search for? I’ve tried searching, but I’m not sure what I’m looking at. Most switches are labeled on/on.
the top two items of this setup works well too..I tried those a couple of years ago. I was impressed with the compact size but not so much the tone or volume. I thought there were lots of better options at their price point.
If I were looking for an ultra compact that really punched well beyond its size I'd look no further than the Markbass CMD 121P combo....
Markbass Mini CMD 121P 1x12 Bass Combo Amp 2014
Nah I already have two I'm trying to sell
I’ve always ran my Tbird wide open. No adjustments to volume or tone whatsoever. That’s where I’ve found the tone I want.
HIYOOOOOOO!!!
Apparently the volume pots don't act as a variable resistor as I always thought but as a voltage divider and has the tendency to roll off the high frequencies the more you use, not that I understand that. So bypassing the pot circuitry altogether should change the tone of the pups altogether to be more like what you have on the Blackbird. You could rearrange the wiring to include a low profile slide switch on the cavity cover so you can have the choice on whether to bypass the pots or use the standard wiringHey guys, one more question. I’ve been playing my Cherry Tbird exclusively since 2012, and I love it. But, since I’ve gotten my Blackbird lined out I’m wondering if I wired my cherry bird like my Blackbird would it sound a little more aggressive? I never use the tone or volume pots anyways. So why not just put in a kill switch like my Blackbird?? Where would I find a good on/off switch to wire in, and what works if I search for? I’ve tried searching, but I’m not sure what I’m looking at. Most switches are labeled on/on.
Oh, that's my one -- thanks!
Is that original or has it been modded? Did Gibson make IIs in the 80s?
Wow, that Cataldo cavity is tight!
I see that you talk a lot of amps (Traynor, Mesa Boogie, TC elec .......) but, everyone knows that Bird is like a PBass, it plugs into an Ampeg.
View attachment 3005517
Wow, that Cataldo cavity is tight!
Have you ever thought about replacing the Vol pot with an on/off switch like Uncle Jack is talking about doing?
Translation...Je crois que non!
In my case yes. It's the only way we could record multiple movies (5+) simultaneously. We have 3 generations of family living in the house so viewing habits and shows of interest vary significantly. The mini boxes work fine for viewing and can connect back to a central box for recording. But if you want to record two or more items at the same time they can't do it. With our cable, even the mini boxes draw current 24/7, but because there is no hard drive in them it is less, probably about the same as a 150 watt light bulb. IIRC the amp draw is listed on the back panel of the device, that can be converted to kWh to get a feel for how much energy you're using.So each box is an individual DVR?
.
In my case yes. It's the only way we could record multiple movies (5+) simultaneously. We have 3 generations of family living in the house so viewing habits and shows of interest vary significantly. The mini boxes work fine for viewing and can connect back to a central box for recording. But if you want to record two or more items at the same time they can't do it. With our cable, even the mini boxes draw current 24/7, but because there is no hard drive in them it is less, probably about the same as a 150 watt light bulb. IIRC the amp draw is listed on the back panel of the device, that can be converted to kWh to get a feel for how much energy you're using.
Wow, that Cataldo cavity is tight!