Take the picture from the other end and post it. In this picture you have already posted you can see the difference in the nut height. In the first picture look at the gap between the nut and the first fret, if the neck was twisted like that along its length it would be a 30 degree twist.
Nuts aren't cut symmetrical and may give the impression of a twist even when straight. The reason they aren't cut symmetrical is to get the lager diameter strings the same height from the frets and also more room for the excursion that results from a pluck. Larger diameter strings describe a larger path than smaller ones.
Taking the picture from the headstock also distorts the perception of the frets, from the headstock end the frets start running together due to the decreased spacing higher on the neck. That perception is substantially mitigated when the picture is from the other end.