Were do install these two wires.help

[Rob_NIB]

where do i solder the green and the bare wires to for my neck and bridge pickup. also where do i solder the bridge ground wire. my pickups up are bartolini mk american replacements

 

[Rob_NIB]

sumone please help

 

[SBassman]

There are probably many wiring pics out there, but I don't know where they are, either. I could use to bookmark some, as I need to do some wiring work myself.

 

[Rob_NIB]

that would be kinda helpful but i really just need to know where do i solder the bridge ground wire and the green and bare wire from the pickups. and do i have to do anything with the gold plates under the pickups

 

[Mrdak]

Google is your friend bro... Invalid Link Removed

 

[Rob_NIB]

i have seen that. i dont understand it

 

[lbwdog]

i have seen that. i dont understand it

Uh-Oh!!

 

[Rob_NIB]

basically wat does the ground get soldered to.

 

[line6man]

Connect them to the back of the volume pot.

 

[Mrdak]

i have seen that. i dont understand it

What's the exact model # of your pickups?

 

[Rob_NIB]

aite and does the gold plate under the pickups have to be attached to anything

 

[Mrdak]

Be a little bit more specific....... it should have a model #?
And what bass are you doing this with..... a jazz bass?
See if your pickups are listed here..... Invalid Link Removed

 

[TrooperFarva]

This is very fundamental stuff you're talking about here. If you don't understand it to the degree that you started 2 threads about it, maybe you should just bring it to a professional.

 

[zone1]

The green(ground) and bare(shield) both get soldered to the back of the volume pot. The brass plates are shields and their wires should be also soldered to the back of a pot or grounded.