It seems to me that this relatively cheap noise gate with build in HPF and LPF could work simply as HPF and LPF with the cut knob engaged the wanted cut frequency dialed in on the HPF and LPF knob and the Sens (sensitivity) control of the actual noise gate set to 0.
As can be seen the HPF works from 40-120Hz and the LPF works from 5-15KHz, both activated when the Cut button is activated.
Not sure my assumptions are right though, but as far as I can see that is how it would work.
As can be seen the HPF works from 40-120Hz and the LPF works from 5-15KHz, both activated when the Cut button is activated.
Not sure my assumptions are right though, but as far as I can see that is how it would work.
